Calculating Voltage Across Capacitor: EMF and Internal Resistance Question"

  • Thread starter Thread starter coffeem
  • Start date Start date
  • Tags Tags
    Capacitance
AI Thread Summary
The discussion focuses on calculating the voltage across a capacitor connected to a cell with EMF and internal resistance. To derive the voltage expression, it is essential to consider the relationships between voltage, charge, and current in the circuit. The voltage across the capacitor can be expressed as V = E - Ir, while the charge on the capacitor relates to its capacitance and voltage. For the specific case of a 5000uF capacitor reaching 73V in 10ms and tending towards 150V, simultaneous equations must be solved to find the cell's EMF and internal resistance. Understanding the correct signs and relationships in the equations is crucial for accurate calculations.
coffeem
Messages
91
Reaction score
0

Homework Statement


At time t=0, a cell of EMF E and internal resistance r is connected to the capacitor of Capacitance C.

i) Derive an expression for the voltage across the capacitor at subsequent times.

ii) If the capacitance is 5000uF and the voltage across the capacitor reaches 73 V at a time 10ms after connection, before tending towards a steady value of 150V, what are the values of the cell's EMF and internal resistance?


Homework Equations



E = V - IR?

The Attempt at a Solution



I am unsure about part i. I know for the second part i will have to solve a simultaneous equation... However I can't get part i.

Any advice would be greatly appreciated! Thanks
 
Physics news on Phys.org
You can consider the cell with internal resistance as a perfect cell, which has no internal resistance, in series with a resistor whose resistance = r. Then what do you have for voltage u, charge q, and current i?
 
Umm I really don't know.

V = e - Ir

can you give me some more adivce. I have the answer but have no idea how the question askerer has got there! thanks
 
In these kinds of questions, we must be very careful in considering v, i and q, as it will affect the signs.

Consider the circuit like in the picture. Choose q as the charge of the upper plate. Choose the (+) direction of current i as in the picture. Consider the potential difference between 2 points A and B:
_ For the battery: V_{AB}=e-ir
_ For the capacitor: V_{AB}=q/C
_ Because the current i is "coming into" the upper plate: i=dq/dt
From here, you can solve for V_{AB}. Note that if you choose q and i the way around, or consider V_{BA} instead, the sign corresponding to each in those equations will change.
 

Attachments

  • untitled.JPG
    untitled.JPG
    7.6 KB · Views: 397
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top