- #1
BtrM
- 2
- 0
I need Cylindrical Thermistor to build a fuel flow meter. Need suggestions...
Thanks
Thanks
Can a Cylindrical Thermistor be Used to Build a Fuel Flow Meter?
- Thread starter BtrM
- Start date
-
- Tags
- Cylindrical Thermistor
AI Thread Summary
A cylindrical thermistor can potentially be used to build a fuel flow meter, but specific application details are crucial for effective implementation. Clarification is needed on whether a hollow or solid cylinder is intended for the design. The sensitivity of the thermistor is a concern, as it may struggle to detect fuel flow unless the fuel is significantly heated. Further discussion on the application context and requirements would enhance the feasibility assessment. Overall, careful consideration of thermistor specifications and design parameters is essential for successful integration.
Scenario 1 (figure 1)
A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material.
The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm).
At this level of stretch, the load cell reads 45N tensile force.
Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
which motor is reasonable for slider crank motion , where the motion of slider should be control with motor speed.
Thank you
Similar threads
Hot Threads
-
[Cam Design] - Force and torque curves
- Started by magicfrog
- Replies: 18
- Mechanical Engineering
-
-
Spring-loaded trigger stays in position after impact
- Started by oogaboogaengineering
- Replies: 15
- Mechanical Engineering
Recent Insights
-
Insights Quantum Entanglement is a Kinematic Fact, not a Dynamical Effect
- Started by Greg Bernhardt
- Replies: 7
- Quantum Physics
-
Insights What Exactly is Dirac’s Delta Function? - Insight
- Started by Greg Bernhardt
- Replies: 0
- General Math
-
Insights Relativator (Circular Slide-Rule): Simulated with Desmos - Insight
- Started by Greg Bernhardt
- Replies: 1
- Special and General Relativity
-
Insights Fixing Things Which Can Go Wrong With Complex Numbers
- Started by PAllen
- Replies: 7
- General Math
-
Insights Fermat's Last Theorem
- Started by fresh_42
- Replies: 91
- General Math
-
Insights Why Vector Spaces Explain The World: A Historical Perspective
- Started by fresh_42
- Replies: 0
- General Math