Circuit confusion, light bulbs, switches, and batteries

AI Thread Summary
The discussion revolves around confusion regarding the flow of current in a circuit involving two batteries and light bulbs. Participants question whether the current would move in a figure-eight pattern due to the opposing effects of the batteries. There is a suggestion to create a circuit diagram to clarify the current flow. The concept of current taking the path of least resistance is also explored, raising questions about the actual behavior of electricity in this scenario. Understanding these principles is essential for accurately modeling circuit behavior.
BluJay214
Messages
2
Reaction score
0
Homework Statement
So I came across this problem with this circuit. On the left side the battery is pointing up a wire, with negative side down. There's a switch on the positive side. On the right there is a battery with the negative down as well, with a light bulb on the positive side. Bisecting the wires there's another wire that is midway between the bottom wire connecting the negative ends of the battery and to the right of the switch. This wire has a light bulb on it.

When the switch is open, the circuit is battery, light bulb, light bulb, and back to the battery. When the switch is closed, only the middle light bulb lights up. I was wondering why this is the case.
Relevant Equations
V=IR
The light bulb can be considered a resistor
Before I modeled it, I thought the current would move in a figure 8 due to the battery on the right still loading the current. Then I thought of how the battery on the left would counteract that current. I am still not sure what is going on here. Is it kind of like a short circuit where the current goes the path of least resistance?
 

Attachments

  • page 1.png
    page 1.png
    38.2 KB · Views: 341
  • page 2.png
    page 2.png
    38.4 KB · Views: 325
Physics news on Phys.org
Try drawing an actual circuit diagram and use current loop analysis
 
why doesn't it move in a figure 8 though? wouldn't it do that or is that not how electricity works?
 
BluJay214 said:
why doesn't it move in a figure 8 though? wouldn't it do that or is that not how electricity works?
Try drawing an actual circuit diagram and use current loop analysis
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top