Circular Motion of a space station Problem

AI Thread Summary
To achieve an artificial gravity effect equivalent to Earth's gravity on a rotating space station with a diameter of 1.30 km, the required rotational speed must be calculated. The calculations involve determining the velocity using the formula v = sqrt(r * g) and then finding the period T using T = 2πR/V. It is essential to solve the problem in terms of variables before substituting numerical values to minimize errors. The relationship between mass, velocity, and radius can be expressed through the equation mg = mv²/r, which simplifies the analysis. Proper attention to units, particularly for radius, is crucial in the calculations.
kye6338
Messages
4
Reaction score
0
Hi,
I was hoping I could get some help on these problems. Here's the first problem:
1. A projected space station consists of a circular tube that is set rotating about its center (like a tubular bicycle tire). The circle formed by the tube has a diameter of about D = 1.30km. What must be the rotation speed (in revolutions per day) if an effect equal to gravity at the surface of the Earth (1g) is to be felt?

So here's what I did: I converted the diameter from km to m, then got the radius, which is 650 km. Then, I found the velocity of the station by doing v= sqrt r x g . I got 79.81 m/s. And then I used the formula T= 2PiR/V ...and I got 51.17. My question would be what are the units at this point? I assumed it was revolutions per second, then converted to revolutions per day, but that was not correct. Maybe I'm missing a step, so please help!
 
Physics news on Phys.org
It is easier so substitute the values you were given at the very end. Only consider the center of mass of the space station. This allows you to write the following:

v=\frac{\Delta x}{\Delta t} = \frac{C}{T} = \frac{2\pi (R + d)}{T}

and

a=\frac{v^2}{(R+d)}

where "R" is the radius of the Earth "d" is the distance from the surface of the Earth. I hope it helps.
 
Do you mean substituting the values given in the problem into those equations? If I did that, wouldn't I have two unknowns with v and T?
 
You can find V with some energy equations, and T is the time of one revolution of the satelite. Notice those are just the equations for average velocity and centripetal acceleration.

He was pointing out that it is easier (and less likely to induce error) if you solve the problem in terms of its variables first, THEN plug in numbers at the very end.
 
kye6338 said:
Hi,
I was hoping I could get some help on these problems. Here's the first problem:
1. A projected space station consists of a circular tube that is set rotating about its center (like a tubular bicycle tire). The circle formed by the tube has a diameter of about D = 1.30km. What must be the rotation speed (in revolutions per day) if an effect equal to gravity at the surface of the Earth (1g) is to be felt?
One is asked to find a rotational speed \omega such that the force exerted on a mass (m) would be equivalent to mg, where g is the acceleration due to gravity at the Earth's surface, 9.81 m/sec2.

One could simply use a force balance mg = mv2/r = m\omega^2r.

Also, check units on the radius.

For some insight, see -

angular velocity,
centripetal force, and
centripetal acceleration.
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top