Closed Feedback Loop mechanical system examples

AI Thread Summary
Examples of closed feedback loop mechanical systems discussed include a saline solution manufacturing system, where a continuous flow of distilled water and a controlled valve maintain a desired salt concentration. The system utilizes electrodes to measure conductivity, providing feedback for valve adjustments. Other suggested systems include those with one or two degrees of freedom, focusing on simple inputs like force or torque and outputs such as velocity or position. The goal is to model these systems, linearize them, and derive their transfer functions and state space representations. The discussion emphasizes the need for straightforward examples that meet specific project requirements.
nakas12
Messages
10
Reaction score
0

Homework Statement



Hello everybody I was hoping some of you could give me some some examples of some closed feedback loop mechanical systems.

This is for my controls class where we have to design our own control system. I'm having trouble trying figure out some systems. I know one would be cruise control but that is not an option considering it was shown as an example in our class.

Our goal is to model the system, linearize it and then find the systems transfer function and then find the state space representation.

Any suggestions would be helpful, but please nothing too difficult. Our goal is to use a simple mechanical problem.
 
Physics news on Phys.org
nakas12 said:

Homework Statement



Hello everybody I was hoping some of you could give me some some examples of some closed feedback loop mechanical systems.

This is for my controls class where we have to design our own control system. I'm having trouble trying figure out some systems. I know one would be cruise control but that is not an option considering it was shown as an example in our class.

Our goal is to model the system, linearize it and then find the systems transfer function and then find the state space representation.

Any suggestions would be helpful, but please nothing too difficult. Our goal is to use a simple mechanical problem.

It would be best if you would post your thoughts on such systems first. We don't do your homework for you here (which you know), but we should be able to suggest some systems for you to think about and build upon, as long as you show us your thoughts first. I have a few good suggestions for you, but would like to see how your are thinking about this school project first...
 
Ok sorry about that. But I'm thinking of having a system with either 1 or 2 degrees of freedom. I was thinking of a simple system where the input would be a force or torque and the output could be some kind of velocity or position.

The transfer function our professor wants though is a 3rd order or more.
 
nakas12 said:
Ok sorry about that. But I'm thinking of having a system with either 1 or 2 degrees of freedom. I was thinking of a simple system where the input would be a force or torque and the output could be some kind of velocity or position.

The transfer function our professor wants though is a 3rd order or more.

Wouldn't the inputs and output be switched from what you propose? Maybe I'm not understanding the systems you want to model...
 
Umm I guess. Now I'm a little confused about what you mean. A system that was applied a force such as a car would have a certain velocity that it would to reach like cruise control.
 
How about a home thermostat? The system would include the heater, room heat capacity, etc.
 
Unforunatley no I can't use that system. It's been used before too many time apparently.
 
Ok, you're manufacturing saline solution for medical use. You start with distilled water continuously flowing into a tank at a constant rate, and a valve that drops salt from a salt container into the tank. A pair of electrodes measures the salt concentration and controls the valve so as to set the concentration to the desired level. Fresh distilled water continuously pours into the tank so the valve will be shutting on and off to keep the saline level constant.

(Salt when dropped in water ionizes almost completely so the water's conductivity is a measure of saline concentration.)

This feedback system has elements of continuous as well as discrete subsystems in it.

If you have trouble with the on-off valve, you could assume a continuously variable valve aperture to control the flow of salt continuously rather than the way a house furnace turns on & off. the analysis would be simpler in that case.
 

Attachments

Back
Top