CNC Turning Process: Learn the Basics & Machine Diagrams

AI Thread Summary
The discussion focuses on seeking assistance with understanding the CNC turning process and obtaining machine diagrams. Participants inquire about specific aspects of CNC machines, including the types of diagrams needed and the relevance of simulation software. There is a request for a manual or introductory materials for beginners in CNC. Clarifications are sought regarding the specific type of CNC machine and the details of the diagrams required. The conversation emphasizes the need for precise information to facilitate effective assistance.
dv7_sun
Messages
4
Reaction score
0
could anyone help me with cnc turning process, diagram of machine. it be better if you can give me manual book about it. i need to learn about cnc from introduction and part of that machine. I'm new in this course.
 
Engineering news on Phys.org
Welcome to the forum.

Are you wanting to understand the computer language that the CNC machines use, such as G and M code or just CNC machines in general?

There are a wide variety of CNC machines ranging from sophisticated 5 axis - drilling and vertical/horizontal milling machines to lathes and cutters.

Here is a link to the CNC forum.

http://www.cnczone.com/forums/showthread.php?t=65035

Hope that helps.

Thanks
Matt
 
can help me to fine the diagram of machine part and the free simulation software
 
..diagram of machine.

What type of CNC machine? A diagram of what? The cooling flow system, the working head, etc...

Please provide information that will actually allow someone to help you.

..free simulation software

What are you asking for? You don't use a CNC machine to perform simulations.

Again, provide information that will actually allow someone to help you.

Thanks
Matt
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

How can I get my prototype made?
Replies
3
Views
1K
Automotive Parameters required for a ZK worm gear
Replies
9
Views
3K
Mechanical Advantage on Gym Machines
Replies
3
Views
146
Did working as a MechE help you learn about tools in a machine shop?
Replies
10
Views
3K
Creative Engineering Projects: Inspiring Ideas for Final Year Projects
Replies
2
Views
2K
Venturi injector suction not adequate
Replies
19
Views
5K
Can a Lift and Rotate Mechanism Handle Heavy Duty Machining Needs?
Replies
2
Views
3K
Find suitable SI units to work with a Vibration Sensor
Replies
5
Views
2K
Tensile test machine and Extensometer -- connection problems
Replies
1
Views
2K
Pulling a vacuum on a heat pump with a recovery machine
Replies
1
Views
3K

Hot Threads

Recent Insights

Back
Top