Coal Car and horizontal impulse

AI Thread Summary
A railroad hopper car with a mass of 30,000 kg, carrying 50,000 kg of coal, releases the coal at a speed of 5 m/s over 4 seconds. The horizontal impulse delivered to the coal by the platform is calculated to be 250,000 kg*m/s, as the initial momentum of the coal is 250,000 kg*m/s and the final momentum is zero. A discussion arises about the scenario where coal is thrown backward instead of dropped, leading to questions about the car's final speed after all coal is removed. The conservation of momentum is emphasized as the key principle, with the need to avoid mixing kinetic energy and momentum calculations. Ultimately, the focus remains on applying momentum conservation to find the new speed of the car after the coal is thrown.
turandorf
Messages
18
Reaction score
0

Homework Statement


A railroad hopper car has a mass of 30000 kg when empty and contains 50000 kg of coal. As it coasts along the track at 5 m/s the hopper opens and steadily releases all the coal onto a platform below the rails over a period of 4 s. What is the horizontal impulse delivered to coal by the platform?


Homework Equations


Pi=Pf
J=change in p/change in t


The Attempt at a Solution


I tried 40,000 (which is total mass*velovity)=15,000(which is car*velocity)x which i thought was the change in momentum so I divided that by 4 sec. This was wrong. Any ideas?
 
Physics news on Phys.org
Welcome to PF.

Well they want the horizontal impulse. So how much is dropped over the 4 seconds?
Presumably all of the 50,000kg.

That amount of coal was moving at 5 m/s.
So that's your initial momentum.
The final momentum is seemingly 0.
And 4 seconds is the interval ...
 
Thanks for the help! I really appreciate it! (btw the answer was 250000 kg*m/s)
 
I seem to be stuck on this part now
e) Let's say that instead of the coal falling out of the bottom of the coal car, some very strong physics student threw it backwards from the car, so that the velocity of each piece of coal was zero just after it left her shovel. How fast does the car travel after all the coal is thrown instead of dumped?
I think the equation I need is:
.5(m1Vi)^2-.5(m2Vf)^2=miVi-m2Vf
where m1 is the mass of coal and the car and m2 is just the empty car. Vi=5 and Vf is what I am looking for. So I have the change in KE equals the change in momentum. I tried solving it and got nowhere. Please let me know if this is the right approach. Thanks in advance for the help.
 
Maybe think of it in terms of conservation of momentum?

That won't change now will it?

Since the velocity of the coal, through the efforts of the eager to learn physics students, will have all of its momentum stripped away and retained by the car and the shoveling classmates, you have the whole load of coal acquiring a momentum of 0, by the time it's all shoveled off.

For momentum before to be the same as momentum after all the hard work ...

Or you could look at it as a center of mass problem. What speed does the car need to go for the center of mass to remain in motion at 5 m/s, if the load goes to 0 velocity.
 
turandorf said:
I think the equation I need is:
.5(m1Vi)^2-.5(m2Vf)^2=miVi-m2Vf
where m1 is the mass of coal and the car and m2 is just the empty car.
That equation isn't dimensionally consistent, so it can't be right. (Compare the units of KE to the units of momentum.)
Vi=5 and Vf is what I am looking for. So I have the change in KE equals the change in momentum.
KE and momentum are different beasts with different units and cannot be set equal to each other.

Hint: Forget about kinetic energy--it's not conserved. (The person threw the coal, adding energy.) Just apply conservation of momentum. What's the final speed of the coal?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top