Coefficient of static friction

AI Thread Summary
To find the coefficient of static friction for an apple crate weighing 49N and accelerating at 0.5m/s² with a 20N force applied at 19 degrees, the equations of motion must be set up correctly. The net force in the x-direction is influenced by the applied force, while the y-direction accounts for the normal force and weight. Initial calculations yielded a coefficient of 0.386, but after correcting for equilibrium conditions (setting fx and fy to zero), the correct value of 0.445 was confirmed. This highlights the importance of ensuring all forces are balanced when dealing with static friction problems. Properly applying these principles leads to accurate results in physics calculations.
hannsparks
Messages
31
Reaction score
0
An apple crate with weight of 49N accelerates at 0.5m/s2 along a horizontal a force of 20N apllied above the horizontal at 19 degrees is required to bring the crate on the verge of motion. Find the coefficient of static friction between the crate and the surface.

-usn+20 cos 19 x direction
N+W+20 cos 19 y direction

F=ma F=5x0.5
F=2.5

don't know what to do next..please help
 
Physics news on Phys.org
I did it exactly the way I did the other problem but according to the book the answer should be 0.445 but I am getting 0.386
 
i don't know what I am doing wrong I don't thnik the book is wrong it says 0.445 and I got 0.386 like 4 times in a row
 
I got .386 too. But that is not to say that I didnt do anything wrong either, but it is a good sign we both got the same answer.
 
I redid the question and I got 0.445 I forgot to set fx and fy equal to zero because the crate is not in motion it is on "the verge of motion"
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top