Constant slope acceleration problem

AI Thread Summary
A ball is rolled up a slope with an initial velocity of 11.0 m/s and, after 9.3 seconds, is rolling down with a velocity of 7.3 m/s. The correct approach to find the acceleration is to use the formula a = (Vf - Vi) / t. Plugging in the values, a = (-7.3 m/s - 11 m/s) / 9.3 s results in an acceleration of approximately -1.96 m/s². The confusion arose from trying to separate the motion into two parts and averaging the accelerations, which was unnecessary. The final answer for the acceleration is -2.0 m/s², as confirmed by the teacher.
shuvit760
Messages
3
Reaction score
0
I got this problem:

A ball is rolled up a constant slope with an initial velocity of 11.0 m/s and after 9.3 s the ball is rolling down the slope with a velocity of 7.3 m/s. What is the acceleration of the ball on the slope.

Here's what I tried: I divided the problem in 2 for the ball going up, and the ball going down.

1st Givens: Vi: 11 m/s Vf: 0 t:9.3
2nd Givens: Vi: 7.3 m/s Vf :0

I then got the displacement of half of the slope from the first set of givens, which gave me 51.15. That's where I got stuck. I tried getting a acceleration for both sides of the slope and then averaging, but that wasn't right.

Please help
 
Physics news on Phys.org
a=\frac{{\Delta}v}{t} \implies a=\frac{v_f-v_i}{t}

**hint** velocity has direction, so when the ball is rolling down the slope, it has a negative velocity.

.
 
Ah yes, but there is still a problem. This is what changes then:
2nd Givens: Vi: -7.3 m/s D:-51.15 Vf: 0(I'm not sure if this is right)
So I can get a time for when it's going down of 14 sec.
So I added the inicial velocities of the ball going up and going down and then divided it by 23.3(9.3 sec + 14 sec). But it gave a large decimal.

The teacher gave us the answer of -2.0 m/s^2.

Damn, I'm still stuck. Please advise.
 
The problem tells you that it starts at 11m/s, and 9.3s later it is going down at -7.3 m/s. just plug this information into the equation:

a=\frac{-7.3m/s-11m/s}{9.3s}=\frac{-18.3}{9.3}=-1.96m/{s^2}
 
Wow, I just complicating myself with all my equations. Thank you so much for your help
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top