How Do You Calculate the Voltage Across a Resistor in a Complex Circuit?

AI Thread Summary
To calculate the voltage across the 4.0-ohm resistor in the given circuit, first determine the total resistance using the formula R_total = R1 + R2 + 1/(1/R3 + 1/(R4 + R5)). Next, find the current (I) by applying Ohm's Law: I = V / R_total, where V is the total voltage of 120 volts. The voltage across the 4-ohm resistor can then be calculated using V = I * R, resulting in V = 4 * I. Proper formatting of the circuit diagram is essential for clarity in calculations. Understanding these steps is crucial for solving complex circuit problems effectively.
noofie
Messages
1
Reaction score
0

Homework Statement


Code:
    -------R1---------
   l                   l                          R1=5 ohms
----  V=120            l                          R2= 11 ohms
  -                   R2                        R3= 6 ohms
  l                     l                          R4=8 ohms
  l                     l                          R5=4 ohms
  l              ------------
  l              l            l
  l              l            l
  l              R3           R4
  l              l            l
  l              l           R5
  l              ------------
  l_____________l

Q: find the potential difference across the 4.0 ohm resistor

Homework Equations


The Attempt at a Solution


V= IR
V/ (R1+R2)

(V/(R1+R2)) / 2

((V/(R1+R2))/2) x ((1/R4)+(1/R5))^-1
 
Last edited:
Physics news on Phys.org
I'm sorry, I'd try to help if i can, but I can't understand your diagram??
 
Use the code tags to preserve the formatting of your characters.

use [ CODE ] [ /CODE ]*

*no whitespaces.
 
Last edited:
Find the total resistance of the circuit, then the current I = V/Total R.

The voltage across the 4 ohm resistor is then 4*I.

R total = R1 + R2 + 1/(1/R3+1/(R4+R5))
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top