Diffraction of light question - How do I approach this?

AI Thread Summary
The discussion revolves around a homework problem involving the diffraction of blue light from a star through a grating. The key question is to calculate the number of lines per millimeter on the diffraction grating given the angular separation of the second-order beams. The initial confusion stems from the participant's uncertainty about the relevance of Young's double-slit experiment to diffraction gratings. After some calculations, the participant arrives at a conclusion of 400 lines per millimeter, seeking verification of their working. The response indicates that the principles of diffraction gratings share similarities with the two-slit experiment, particularly in the behavior of maxima.
Micky76
Messages
4
Reaction score
0

Homework Statement


Question:
Blue light of wavelength 485.6nm from a star is incident normally on a diffraction grating. The light is diffracted into a number of beams, as shown in Fig 5.4.(attached)

The angular separation of the two second-order beams is 45.72 degrees.
Calculate the number of lines per millimetre on the grating.

Homework Equations



The Attempt at a Solution



I genuinely do not know where to start the question. I know the formula for Young's double slit experiment however this does not seem to relate to it at all. Any suggestions for starting the question would be really appreciated.
 

Attachments

  • Fig 5.4.jpg
    Fig 5.4.jpg
    13 KB · Views: 461
Physics news on Phys.org
Read your textbook. It surely mentions diffraction gratings.
 
Never seen the formula before. The question is from an old past paper so it might be off the specification. The only thing relating to path difference that I have seen is the Young's modulus experiment. Anyways I had an attempt, is my working correct?

Θ = 45.72/2 = 22.86 degrees
2*485.6*10^-9 = d sin(22.86)
d = 2.50*10^-6 m
d = 2.50*10^-3 mm
N = 1/d = 1/(2.50*10^-3) = 400
Lines per mm = 400

There is no mark scheme for this so if someone could verify my working that would be great.
 
Looks good. With a diffraction grating the only difference is the maxima become sharper otherwise it's the same as the two-slit experiment
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top