Distance travelled by the case down a ramp w/a spring at the bottom

  • Thread starter Thread starter brunettegurl
  • Start date Start date
  • Tags Tags
    Ramp Spring
AI Thread Summary
A 5.0 kg case of bottled water slides down a 25-degree ramp and compresses a spring by 5.5 cm upon impact. The spring constant is calculated to be 13,000 N/m using the spring's force at 2.0 cm compression. The energy equations involve gravitational potential energy and spring potential energy, with the correct height expression requiring the sine of the angle, not cosine. The initial confusion stemmed from misinterpreting the significance of the 2.0 cm compression, which is solely for calculating the spring constant and not relevant to the final compression. The case of water travels a distance of 0.6139 m down the ramp before hitting the spring.
brunettegurl
Messages
138
Reaction score
0

Homework Statement



A 5.0 kg case of bottled Spring water is released from rest down a shipping ramp inclined 25oto the horizontal. At the base of the ramp, oriented parallel to its surface, is a spring that can be compressed 2.0 cm by a force 260 N. The case of water moves down the ramp and compresses the sring by 5.5 cm. How far has the case of water traveled down the ramp from its point of release before hitting the spring?

Homework Equations


Fspring= kx
E=mgh
E=0.5*kx2

The Attempt at a Solution


know that the force exerted by the spring is 260 at x=0.02 m i figured out k which is 13000N/m. i know that h= dcos \vartheta. i set up the equation
mgdcos\vartheta= 0.5*kx2 where x now equals the difference between 5.5cm and 2.0cm and solved for d i ended up getting 1.8m when the answer is actually half that i was wondering what i did wrong??
 

Attachments

  • springwatercase.jpg
    springwatercase.jpg
    4.9 KB · Views: 408
Physics news on Phys.org
Check your expression for "h."
 
if i use sin theta i get -1.2278 m
 
It should be sin, not cos. And x is not the difference between 5.5 cm and 2.0 cm, it's just 5.5 cm, i.e. the amount by which the spring is compressed.
 
ok...so then the 2.0 cm was just given to us to figure out the force and has nothing to do with the actual compression of the spring when the bottle hits it..??
 
brunettegurl said:
ok...so then the 2.0 cm was just given to us to figure out the force and has nothing to do with the actual compression of the spring when the bottle hits it..??

Right. The 2.0 cm figure is only used to determine the spring constant.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top