Electric Field and Force in a Cell Membrane

AI Thread Summary
The discussion centers on calculating the electric field and force within a cell membrane modeled as a parallel plate capacitor with a charge density of 7.31 x 10^-6 C/m². To find the electric field, the equation E = charge density/ε₀ is used, where ε₀ is the permittivity of free space. Participants express uncertainty about the value of ε₀, which is necessary for completing the calculations. Once the electric field is determined, the electric force on a potassium ion (K+) can be calculated using F = (electric field)(charge). Understanding these concepts is crucial for solving the problem effectively.
nic4birds
Messages
3
Reaction score
0

Homework Statement


The membrane surrounding a living cell consists of an inner and an outer wall that are separated by a small space. Assume that the membrane acts like a parallel plate capacitor in which the effective charge density on the inner and outer walls has a magnitude of 7.31 x 10-6 C/m2. (a) What is the magnitude of the electric field within the cell membrane? (b) Find the magnitude of the electric force that would be exerted on a potassium ion (K+; charge = +e) placed inside the membrane.


Homework Equations


E=charge density/Eo
F=(electric field)(Charge)
E=q/(Eo)A
 
Physics news on Phys.org
nic4birds said:

Homework Statement


The membrane surrounding a living cell consists of an inner and an outer wall that are separated by a small space. Assume that the membrane acts like a parallel plate capacitor in which the effective charge density on the inner and outer walls has a magnitude of 7.31 x 10-6 C/m2. (a) What is the magnitude of the electric field within the cell membrane? (b) Find the magnitude of the electric force that would be exerted on a potassium ion (K+; charge = +e) placed inside the membrane.


Homework Equations


E=charge density/Eo
F=(electric field)(Charge)
E=q/(Eo)A
You seem to have missed out section three of the template: Attempted Solution...
 
for this problem i do not know how to start it, i believe that the 7.31 value is the charge density but i do not know what the other value Eo would be. once i can solve for the first part i will be able to calculate for the magnitude of the electric force
 
nic4birds said:
for this problem i do not know how to start it, i believe that the 7.31 value is the charge density but i do not know what the other value Eo would be. once i can solve for the first part i will be able to calculate for the magnitude of the electric force
Eo or ε0 is the permitivity of free space, which is a constant one has to look up.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top