Electric Potential Problem Assistance

AI Thread Summary
To determine the electric potential at a point halfway between the charges -Q and +3Q in an equilateral triangle configuration, the relevant formula is V = kQ/r. The distance from each charge to the midpoint is L/2 for the charges -Q and +3Q, while the distance to the third charge (-4Q) is L√3/2. The total electric potential is the sum of the potentials from each charge, expressed in terms of L and Q. The final answer should be in its simplest form, factoring completely and consisting of a single fraction. The focus is on expressing the potential without needing a specific numerical value for L.
phunphysics1
Messages
2
Reaction score
0
Electric Potential Problem Assistance!

Homework Statement


There is an equilateral triangle with one point charge at each vertex. The point charges have charges of -Q, +3Q and -4Q respectively. The length of one side of the triangle is L. Determine an expression in simplest form for the electric potential at a point halfway between the -Q and +3Q point charges. Simplest form means that the answer is factored completely and consists of only one simple fraction.

Homework Equations


V=kQ/r
Vtot=V_1+V_2+V_3

The Attempt at a Solution


I tried to solve for each missing length "L" I figured that between charges -Q and +3Q it was L/2 because we are looking at a point halfway between them. But I am confuse how to show this through individual calculation of electric potential because L is a variable??
 
Physics news on Phys.org


Why are you solving for L?

L is a given quantity, the length of a side of the triangle. In a real situation, it would be something that you would measure, perhaps 3 cm, or 10 cm, or 5 m, and you would plug that number in wherever you needed the side length of the triangle. But pretend that you don't have a ruler, so you can't measure exactly how large the triangle is. You're just using a letter to stand in for that length, so that later on, when you do measure it, you'll know where to plug it into the formula.

Anyway, back to the problem: you are trying to find the total electric potential at a certain point.
1. What is the potential produced by one of the charges at the point?
2. What is the potential produced by another of the charges at the point?
3. What is the potential produced by the remaining charge at the point?
4. How do you find the total potential?
 


I thought that I was solving for L, in order to find the potential v for each charge at that point? So then what am I solving for if that is not the case?? It doesn't want a numerical number as the value, just variables??
 


No, the question doesn't want a numerical value.

A tip: The answer is in terms of L and Q. The simplest form would include them and a rational number.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top