Electron between charged plates

AI Thread Summary
An electron entering a space between charged plates with a horizontal speed of 1.9E6 m/s experiences vertical acceleration due to the electric field. The problem is approached similarly to projectile motion, where the vertical distance traveled is 0.5 cm while maintaining the horizontal speed. The time taken for the journey is calculated by dividing the plate length (2 cm) by the horizontal speed. Using mechanics formulas, the vertical acceleration is determined, allowing for the calculation of the vertical speed as the electron exits. The final speed is found using the Pythagorean Theorem, resulting in a speed of 2.12E6 m/s upon exiting the plates.
Melawrghk
Messages
140
Reaction score
0

Homework Statement


An electron enters the area between two charged plates having a horizontal speed of 1.9E6. The space between plates is 1cm and the electron enters half way down from the top plate. The length of the plates is 2cm. Find the speed of the electron as it exists the space between plates barely missing the top plate.

The Attempt at a Solution


I figured it would be just an energy question, so I found the initial kinetic energy and the potential energy it would gain through the climb.

As a result though, the speed still stayed the same. I'm not sure if I'm thinking correctly?... Thanks in advance.
 
Physics news on Phys.org
Seems to me that that when the electron leaves the plates is has a component of velocity in the x- direction and an acquired component of velocity in the y-direction. the magnitude of it's velocity is now larger than when it entered.This problem has a close similarity to a projectile motion problem. If I were solving it, I'd use that analogy.
 
Thanks! I used two basic dynamics formulas for acceleration and distance and I got it! :)

It increased to 2.12E6, apparently.
 
Can you explain which equations you used and how?
I have the same problem.
Thanks in advance.:)
 
Yeah, for sure. Well you know that the electron enters 0.5cm from the top (halfway between the plates) and exists at the top's level. So it had to vertically travel 0.5cm. Since originally it only had an x-component (and this speed remains the same), it had to have some force acting on it 'causing acceleration.

First, I set out to find the time it took for the "journey". I took the length of the plate (2cm, in my case) and divided it by the horizontal speed. This yielded some time, let's call it "t".

Now, from mechanics, there is a formula:
d=(1/2)*a*t^2 and I used that to find the vertical acceleration (0.5cm, t=t).

Next you really have a few ways of doing this. The simplest is:
a=(delta)v/(delta)t = (vf-vi)/t
In that equatoin you know a and t, and you know that vi=0 (initial vertical speed). This equation will give you the vertical speed as the electron exists the space between plates.

Now use Pythagorean Theorem to find the net speed/velocity.

Hope this helped :)
 
Thank you so much! This helped me a lot!
You are excellent at explaining what you did!

Thanks again :)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top