Energy Conservation in RLC circuit

AI Thread Summary
The discussion focuses on calculating energy stored in a series RLC circuit at specific time intervals and verifying energy dissipation in the resistor. The initial energy calculation seems straightforward using the formula for energy in capacitors and inductors. However, the challenge arises in integrating the expression for power dissipation, I²R, over the specified time interval. Participants suggest using trigonometric identities to simplify the integration process and recommend integration by parts for the resulting products. The conversation highlights common difficulties in applying mathematical techniques to solve circuit problems effectively.
Opus_723
Messages
175
Reaction score
3

Homework Statement



Assume the current in a series RLC circuit is given by I = ACω(sin(ωt) + \frac{α}{ω}cos(ωt))e^{-αt}.

Calculate the energy stored in the circuit at t=0. Then calculate the energy stored in the circuit one-quarter cycle later, at t=\frac{\pi}{2ω}.

Verfiy that the difference is equal to the energy dissipated in the resistor R during this interval.

For this problem, assume the damping is slight, that is, that \frac{α}{ω} << 1, and neglect quantities proportional to α^{2}.

The Attempt at a Solution



I'm pretty sure I have the first part right, since it seems like a straightforward use of \frac{CV^{2}}{2} + \frac{LI^{2}}{2}. A couple of e^{-αt}'s simplify to 1 when you plug in 0 and \frac{\pi}{2ω} for t since \frac{α}{ω} << 1.

But for the next part, I think they're asking me to integrate I^{2}Rdt over the interval, and I am not seeing how to approach that integral. Expanding the equation for I to get I^{2} just makes a mess no matter what small terms I ignore. I don't know if I'm just being clumsy with my math or if I'm approaching it wrong. I even tried using complex numbers to represent the power but I ended up with a nonsensical answer. Any advice on tackling this part of the problem?
 
Physics news on Phys.org
I am not sure what mess you are getting. After the expansion, you should get three terms, one of which gets neglected, the other two are readily integrated. What is the difficulty you are having?
 
Well, after expanding, I get I^{2}R = A^{2}C^{2}ω^{2}R(e^{-2αt}sin^{2}(ωt) + \frac{2α}{ω}e^{-2αt}sin(ωt)cos(ωt) + \frac{α^{2}}{ω^{2}}e^{-2αt}cos^{2}(ωt))

Of course the last term in the parentheses can be dropped, but I don't know how to integrate the other two. It's probably simple, but I'm not seeing it.
 
Last edited:
EDIT: Sorry for the double post. Computer froze. Is there any way to delete these?
 
Convert the trigonometric products to functions of double angle, then integrate the exp-trig products by parts - if you have to, otherwise those products are frequently given in tables of integrals.
 
Ah, thank you. I always forget my trig identities, and then I feel silly.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top