Engineer Needed: Interview for Engineering Class (10 Questions)

AI Thread Summary
An individual is seeking to interview someone with a mechanical engineering degree for a Principles of Engineering class, requiring responses to ten specific questions. The request is made in a forum setting, where the poster expresses uncertainty about the appropriate section for such inquiries. However, the forum moderators have indicated that interview threads are no longer permitted due to privacy and anti-phishing concerns. As a result, the thread has been closed. This highlights the importance of adhering to forum guidelines when seeking assistance.
mattd40
Messages
1
Reaction score
0
For my Principles of Engineering class, I need to interview someone with an engineering degree (preferably in mechanical engineering) and working in the engineering field. There are only ten questions. If you are willing to help me, please post a reply and i will pm you the questons. Thanks!

Sorry if this was supposed to go into the homework section, but it looks like that has a specific format that needs to be followed and this doesn't seem to fit.
 
Last edited:
Engineering news on Phys.org
mattd40 said:
For my Principles of Engineering class, I need to interview someone with an engineering degree (preferably in mechanical engineering) and working in the engineering field. There are only ten questions. If you are willing to help me, please post a reply and i will pm you the questons. Thanks!

Sorry if this was supposed to go into the homework section, but it looks like that has a specific format that needs to be followed and this doesn't seem to fit.

Sorry Matt. For privacy and anti-phishing reasons, the PF no longer allows interview threads. Thread closed.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

Mechanical Engineer Career. Short 3 question interview.
Replies
1
Views
1K
Can You Help Find a Mechanical Engineer for an Urgent Student Interview?
Replies
1
Views
1K
Need to interview a Mechanical Engineer
Replies
1
Views
2K
I need to interview an engineer for a school project.
Replies
1
Views
2K
Specified Torque Specs on Automotive Fasteners -- Required or just suggestions?
Replies
13
Views
4K
Mechanical Engineer Needed for Interview Please
Replies
3
Views
1K
Professional Mechanical Engineer Interview
Replies
1
Views
2K
Need to interview an engineer for assignment
Replies
4
Views
5K
ME Interview for Writing Class Needed
Replies
1
Views
1K
Mechanical Engineer Class Interview
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top