Equilibrium Temperature of water in cup

AI Thread Summary
The discussion focuses on calculating the equilibrium temperature of a system consisting of an ice cube, water, and an iron cup. Participants highlight the importance of using the correct specific heat capacities and latent heat values in the calculations. The initial attempt at the solution was flawed due to incorrect conversions and missing terms, particularly regarding the melting ice and the warming of meltwater. It is emphasized that the temperature change factors should reflect that the water and cup are cooling down while the ice and meltwater are warming up. A revised approach is suggested, incorporating all relevant terms to accurately solve for the final temperature.
Rayvin
Messages
2
Reaction score
0

Homework Statement



A 37 g ice cube at 0.0°C is added to 110 g of water in a 62 g iron cup. The cup and the water have an initial temperature of 40°C.
(a) Find the equilibrium temperature of the cup and its contents.


Homework Equations


I think a relevant equation is (m Lsubf) + (mc delta T) + (mc delta T)


The Attempt at a Solution



I am completely lost, I started out (.110kg)(4.186 j/ kg c) (T-40) + (.037)(2090 j/ kg c)(T-0) + (.062) (448 j/kg c) (T-40) , I think I have most the units correct, I just don't know the correct equation for the problem or maybe what to do with all the units. Help please, am I using the correct equation? am I missing units? What is L sub f ?

I added the like units and mutiplied them then divided by T value to get T:
(.209kg)(2542.186 j/kg c)/80 and got T= 6.64 C. This came up as incorrect and I was wondering if anyone could tell me what I did wrong?
 
Last edited:
Physics news on Phys.org
Your equation looks right:

(.110kg)(4.186 j/ kg c) (T-40) + (.037)(2090 j/ kg c)(T-0) + (.062) (448 j/kg c) (T-40)


= 0

solve for T.
 
I added the like units and mutiplied them then divided by T value to get T:
(.209kg)(2542.186 j/kg c)/80 and got T= 6.64 C. This came up as incorrect and I was wondering if anyone could tell me what I did wrong?
 
Rayvin said:

The Attempt at a Solution



I am completely lost, I started out (.110kg)(4.186 j/ kg c) (T-40) + (.037)(2090 j/ kg c)(T-0) + (.062) (448 j/kg c) (T-40) ,

I think you have converted some of your heat capacities and not others: iron would be 448 j/kg c, but then water must be 4186 j/kg c .

I take it that the 2090 j/kg c is what you are using for the latent heat of fusion (or melting of ice). The process of melting the ice is a phase transition which occurs at constant temperature 0 C, so there shouldn't be any temperature factor there. But also, the latent heat should be 334,000 j/kg , no, since it's 80 cal/gm? (You don't need a warming term for the ice, since its initial temperature is given as 0 C.)

You are also missing a term: the 37 g of meltwater from the ice will be warming up from 0 C, so you need a (.037)(4186 j/kg)(T - 0) to account for that.

If you set up the calorimetry equation with all the terms on one side, don't forget that the ice is warming up, but the water and iron cup are *cooling down*. The temperaure change factors would have to be written as (T final - T initial).

You'll need to rewrite your equation in this light and try solving it again.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top