Find acc. given coefficient of frict. on incline slope

AI Thread Summary
The discussion focuses on calculating the acceleration of a box being pulled down an incline, given a pulling force, mass, and coefficient of friction. The user initially calculates the x and y components of the pulling force but struggles with determining the normal force correctly. Key feedback indicates that the weight of the box must be included in the calculations to accurately find the normal force. It is emphasized that all forces acting on the box should be considered, and a diagram may help clarify the forces involved. Correctly summing the forces in each direction is essential for solving the problem accurately.
shizupple
Messages
20
Reaction score
0
1. The problem statement, all

variables and given/known data

A clerk moves a box of cans down an

aisle by pulling on a strap attached to

the box. The clerk pulls with a force

of 190.0 N at an angle of 28° with the

horizontal. The box has a mass of 37

kg, and the coefficient of kinetic

friction between the box and the floor

is 0.45. Find the acceleration of the

box.


Homework Equations


Ff=U*Fn



The Attempt at a Solution


I tried solving this three times. I

found x and y components:
X:167.8N
Y:89.2N

Tried to find the Fn:
cos(28)89.2= 78.8N

Ff=.45(78.8)
Ff=35.5N
Fa=190-35.5N= 154.6N

154.6N=37a
a=4.2N

I also tried subtracting the force

parallel by the force applied and got

the wrong acceleration also. Am I

finding the Force Normal wrong? Some

direction would be great thanks.
 
Physics news on Phys.org
anyone know what I'm doing wrong here?
 
found x and y components:
X:167.8N
Y:89.2N
OK, this is fine.
Tried to find the Fn:
cos(28)89.2= 78.8N

This is not correct. Are you trying to find your normal force based on the applied force?

You have forgotten to include the weight of the box anywhere in your calculation.

The normal force will be the difference between the weight of the box and the component of the applied force in the vertical direction. When doing problems like this, you must consider all forces in each direction. Make sure to start by drawing a diagram with all of the forces showing. Then sum them up in each direction, to get your equations.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top