Find the magnitude of the difference between the weights (temperature question)

AI Thread Summary
The problem involves calculating the weight difference of a solid aluminum sphere before and after cooling in water, using Archimedes' principle. The initial weight in water is calculated using the sphere's volume and the density of water. The change in volume due to temperature change is expressed through the coefficient of linear expansion for aluminum. A participant noted an incorrect negative result and was advised to focus on the magnitude of the difference, which should be positive. Additionally, there was a correction regarding the expression for volume change, emphasizing the need to use the correct area term in calculations.
physics1007
Messages
6
Reaction score
0

Homework Statement


A solid aluminum sphere has a radius of 2.34 m and a temperature of 89.0 °C. The sphere is then completely immersed in a pool of water whose temperature is 22.3 °C. The sphere cools, while the water temperature remains nearly at 22.3 °C, because the pool is very large. The sphere is weighed in the water immediately after being submerged (before it begins to cool) and then again after cooling to 22.3 °C. Use Archimedes' principle to find the magnitude of the difference between the weights.


Homework Equations


Weight of sphere in water before cooling W1 = W - ρ * g * V1 ρ = density of water
where W = actual weight of sphere and V1 the volume before cooling
Also, W2 = W - ρ * g * V2 Then W2 - W1 = -(V2 - V1 ) * ρ * g
V1 = 4/3 * π * r^3 V2 = 4/3 * π * (r + Δr)^3
Expanding (r + Δr)^3 and dropping any terms with Δr^3 or Δr^2 since these are very small
V2 = 4/3 * π * (r^3 + 3 * r * Δr)
V2 - V1 = 4 * π * r^2 * Δr
Δr = k * r * ΔT where k = coefficient of linear expansion for Al and ΔT the temperature change

This gives V2 - V1 = 4 * π * r^3 * k * ΔT
W2 - W1 = -4 * π * r^3 * k * ρ * g * ΔT


The Attempt at a Solution



i get -2420.678 and that's not right. any suggestions?
 
Physics news on Phys.org
You seem to have the right idea. I did not verify your number, but the problem asks for the magnitude of the difference in weights, which should be a positive number.

Besides the sign, you appear to have a problem with your ΔV expression, but I think you fixed it. ΔV should be the area of the sphere times Δr. In one place you have just an rΔr instead of r²Δr. I think you used the correct expression in your calculation.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top