Finding current across capacitor

  • Thread starter Thread starter kayak4life87
  • Start date Start date
  • Tags Tags
    Capacitor Current
AI Thread Summary
An AC generator with a frequency of 30.0 Hz and an RMS voltage of 12.0 V is connected to a 45.5 µF capacitor. The maximum current calculated is 0.146 A, confirming the initial calculations for part a. For part b, the current when the voltage across the capacitor is 5.25 V and increasing is 138 mA, while for part c, the current when the voltage is decreasing is -138 mA. The discussion includes a suggestion to verify the book's accuracy, as errors are uncommon. Overall, the calculations for parts a, b, and c appear to be correct.
kayak4life87
Messages
6
Reaction score
0

Homework Statement


An ac generator with a frequency of 30.0Hz and an rms voltage of 12.0V is connected to a 45.5uF capacitor. a) what is the maximum current in this circuit? b) what is the current in the circuit when the voltage across the capacitor is 5.25V and increasing? c) what is the current in the circuit when the voltage across the capacitor is 5.25V and decreasing?


Homework Equations


Irms=Vrms/Xc Xc=1/2pi(frequency)(capacitor) Io=Irms X square root of 2


The Attempt at a Solution



a) I first solved for Xc and got 116.6Ohms and Irms=12V/116.6Ohms=0.102A
Io=0.102X square root of 2=0.146A
I think i have this part right, but check it for me. thanks.

b) V=5.25V my attempt was to just divide by my Xc, but that does not come out right. the answer is the book is 138mA.

c) -138mA

thanks for the help
 
Physics news on Phys.org
Part a) is good. I think you did parts b and c right too, is your book known to have errors?
 
very very rarely will it have a wrong answer...
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top