Finding Req in parallel circuit

AI Thread Summary
To find the equivalent resistance (Req) in parallel circuits, the formula 1/Req = 1/R1 + 1/R2 + 1/R3 is used. For resistors R1=12 ohms, R2=8 ohms, and R3=8 ohms, the common denominator is 24, leading to the calculation 1/12 becomes 2/24 and 1/8 becomes 3/24, resulting in (2+3+3)/24 = 8/24, thus Req = 3 ohms. The discussion also clarifies that for another set of resistors R1=5, R2=10, R3=15, the same method applies, emphasizing the need to find the least common multiple for accurate addition. Understanding how to convert fractions to a common denominator is crucial for solving these problems effectively.
Aeden
Messages
2
Reaction score
0
Hi. I am having problems finding the Req in parallel circuits. I have a problem like this


R1- 12
R2- 8
R3- 8
emf- 12
Now I know Req= 1/R1, 1/R2, 1/R3 but my homework book explains that

1/12 1/8 1/8 = (2+3+3)/24 = 8/24 = 1/3 = Req is 3 coulomb


I want to know where the 2+3+3 comes from, I have absolutely no idea how to find that.


I also have another question that says
r1-5
r2-10
r3-15

R1 1/5, R2 1/10, R3 1/15

1/5= .2
1/10= .1
1/15= .066
Req= 0.37

I know this isn't right . I have tried for awhile just by myself to figure this out (I am doing this as a home class) but I cannot do it. Someone please help me out!
 
Physics news on Phys.org
Aeden said:
Hi. I am having problems finding the Req in parallel circuits. I have a problem like this


R1- 12
R2- 8
R3- 8
emf- 12
Now I know Req= 1/R1, 1/R2, 1/R3 but my homework book explains that

1/12 1/8 1/8 = (2+3+3)/24 = 8/24 = 1/3 = Req is 3 coulomb


I want to know where the 2+3+3 comes from, I have absolutely no idea how to find that.

you have R1=12 ohm, R2=8 ohm, R3=8 ohm (I assume that all of them connected in parallel)

so: 1/Req = 1/R1 + 1/R2 + 1/R3 = 1/12 + 1/8 + 1/8 (now you have to make the denominator the same so you can add them up, and in this case it would be 24, then you have to multiply and divide the first term (1/12) with 2/2, so you get 2/24, and the second and the third terms (1/8) multiply and divide them with 3/3, so you get 3/24..

then 1/Req = 2/24 + 3/24 + 3/24 = 8/24 = 1/3 >> then Req =3 ohm ..


Regarding your second question, just follow what I did and you should get the right answer.. :)
 
Welcome to PF

Hi Aeden! Welcome to PF! :smile:
Aeden said:
R1- 12
R2- 8
R3- 8
emf- 12
Now I know Req= 1/R1, 1/R2, 1/R3 but my homework book explains that

1/12 1/8 1/8 = (2+3+3)/24 = 8/24 = 1/3 = Req is 3 coulomb


I want to know where the 2+3+3 comes from, I have absolutely no idea how to find that.

When adding fractions with different denominators (the number on the bottom), it helps to rewrite the fractions so that they all have the same denominator.

Here, 1/12 = 2/24; 1/8 = 3/24; so 1/12 + 1/8 + 1/8 = 2/24 + 3/24 + 3/24 = (2 + 3 + 3)/24. :wink:

(the reason why 24 is chosen is that it's the least common multiplier of 8 and 12)
r1-5
r2-10
r3-15

R1 1/5, R2 1/10, R3 1/15

1/5= .2
1/10= .1
1/15= .066
Req= 0.37

erm :redface: … you forgot to 1/ it at the end! :biggrin:

now try it with the same method as the last one (use the least common multiplier of 5 10 and 15), and then …

get some sleep! :zzz:
 
Oh wow, that was really easy to understand. Thanks a lot, I will now try to solve the other with the instructions given but I completely understand how that works now. Thanks again!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top