Finding the impulse of a hockey puck colliding with a wall

  • Thread starter Thread starter waldosa
  • Start date Start date
  • Tags Tags
    Impulse Wall
AI Thread Summary
The discussion revolves around calculating the impulse experienced by a hockey puck colliding with a wall at an angle. The puck, weighing 261 g and moving at 5.34 m/s, hits the wall and bounces back with the same speed and angle. The user initially calculated the impulse using only the y-component of velocity but received an incorrect answer, indicating a possible error in their calculations. They also noted that the average force exerted by the puck on the wall can be determined using the impulse and the contact time of 10.9 ms. The conversation highlights the importance of ensuring the correct settings on calculators for accurate results.
waldosa
Messages
2
Reaction score
0

Homework Statement



A 261 g hockey puck is sliding on ice with a speed of 5.34 m/s hits a wall at an angle of 27.3° to the wall and bounces back at the same angle with the same speed.

a) If the wall and the hockey puck are in contact for 10.9 ms, find the magnitude of the impulse on the puck.
b) Calculate the average force exerted by the puck on the wall.

Homework Equations


J = F*∆t = ∆p
p = m*v
a = ∆v/∆t

The Attempt at a Solution



a) I assumed that velocity in the x is not changing, and thus ∆Vx = ∆px = 0. Based on that, I assumed that any impulse/change in momentum, can be calculated from the y-component.

Jy = J = m*∆Vy
= m(Vfy - Viy) _____ Viy = -Vfy
= m (2Vfy)
=2*m*Vfy = (2)(0.261)(5.34 sin 27.3)
J = 2.306 kg*m/s

however, it says that this answer is incorrect. I'm not sure where I'm going wrong, as only the initial and final velocities in the y are changing, and thus Jy = J.

b) I'm assuming that the average force can be calculated via J = F*∆t, as i don't have the correct magnitude of the impulse yet, I haven't been able to calculate it correctly
 
Physics news on Phys.org
Check your calculator for the degree/radian setting!
 
Wow I can't believe I missed that, thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top