Finding the Original Charge Given Force

  • Thread starter Thread starter Stephanie Hernandez
  • Start date Start date
  • Tags Tags
    Charge Force
AI Thread Summary
The discussion revolves around calculating the original charge on two identical conducting spheres that repel each other with a force of 0.050 N at a distance of 0.25 m, and then with a force of 0.060 N after being connected by a wire. Participants clarify that the spheres likely had different initial charges, as connecting them would equalize their charges, resulting in a change in the repulsive force. Coulomb's Law is referenced for the calculations, but there is uncertainty about the setup of the equations. The distance between the spheres is assumed to remain constant despite the change in force. The conversation emphasizes the importance of understanding charge distribution in conductive materials.
Stephanie Hernandez
Messages
2
Reaction score
0

Homework Statement


Two small, identical conducting spheres repel each other with a force of 0.050 N when they are 0.25 m apart. After a conducting wire is connected between the spheres and then removed, they repel each other with a force of 0.060 N. What is the original charge on each sphere?

Homework Equations


F(r)= k|q1||q2| / r1 22

The Attempt at a Solution


So since the questions stated that the two spheres were identical, I went ahead and assumed that the two spheres had the same charge and using that along with the other information given, I solved using Coulumb's Law but I didn't even end up using the second part of the data given so I'm sure I messed up on my equation set up
 
Physics news on Phys.org
I believe the intention is that the charges are not identical in the beginning. If they were nothing would change when you connect them.
 
Orodruin said:
I believe the intention is that the charges are not identical in the beginning. If they were nothing would change when you connect them.
Would it be safe to assume that the distance between them stays the same even after the force with which they repel each other changes?
 
Stephanie Hernandez said:
Would it be safe to assume that the distance between them stays the same even after the force with which they repel each other changes?
I would assume so, yes. There is nothing in the statement that would indicate a change in distance.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top