Fluid Statics Problem: Calculating Resultant Force on a Dam - Solution Attempt

AI Thread Summary
To calculate the resultant horizontal force on a dam due to water pressure, only gauge pressure should be considered, as the air pressure on both sides cancels out. The pressure acts in all directions, not just vertically, which allows for a horizontal force exerted on the dam. The absolute pressure on the water side includes atmospheric pressure and the hydrostatic pressure, while the air side only has atmospheric pressure. Therefore, the difference between these pressures, which is the gauge pressure, is what contributes to the horizontal force. Understanding this concept clarifies the dynamics of fluid statics in dam scenarios.
NATURE.M
Messages
298
Reaction score
0

Homework Statement



Water stands at a depth D behind the vertical upstream face of a dam. Let W be the width of the dam. Find the resultant horizontal force exerted on the dam by the water.

The Attempt at a Solution



So I know how to solve the problem, I was just unsure of whether we should be considering the force caused by the absolute pressure (pressure of the liquid & the pressure of the air above it) or just simply the gauge pressure (pressure of the liquid). My intuition tells me the latter (since a force from the pressure of the air would act vertical), but I would just like to verify.
 
Physics news on Phys.org
NATURE.M said:

Homework Statement



Water stands at a depth D behind the vertical upstream face of a dam. Let W be the width of the dam. Find the resultant horizontal force exerted on the dam by the water.

The Attempt at a Solution



So I know how to solve the problem, I was just unsure of whether we should be considering the force caused by the absolute pressure (pressure of the liquid & the pressure of the air above it) or just simply the gauge pressure (pressure of the liquid). My intuition tells me the latter (since a force from the pressure of the air would act vertical), but I would just like to verify.
Your intuition gave you the right answer, but for the wrong reason. The pressure doesn't just act in the vertical direction. It acts in all direction. Otherwise, how does the water pressure exert a horizontal force on the dam? The reason you use the gage pressure is that the air is exerting a horizontal force on the other side of the dam, so the air pressures cancel out.

Chet
 
So there's air pressure on both sides of the dam that cancel?
I thought their was only air pressure on the side of the dam with no water.
And just for emphasis the net force of the air pressure in the vertical direction cancels as well right?
 
NATURE.M said:
So there's air pressure on both sides of the dam that cancel?
Yes.
I thought their was only air pressure on the side of the dam with no water.
No. There is a contribution of air pressure on both sides of the dam. On the water side, the absolute pressure at any depth d is pa+ρgd (where pa is atmospheric pressure). On the air side of the dam, the absolute pressure at any depth d is just pa. The difference between these two pressures is just ρgd, which is the gage pressure.
And just for emphasis the net force of the air pressure in the vertical direction cancels as well right?
The air pressure in the vertical direction is supported separately on each side of the dam by the vertical columns at those locations.
 
Thanks Chestermiller, it makes a lot of sense now.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top