What is the Correct Force Needed to Slow a Drag Racer with a Chute?

  • Thread starter Thread starter physics114
  • Start date Start date
  • Tags Tags
    Forces Homework
AI Thread Summary
To determine the force needed to slow a drag racer from 203 mi/h to 45.2 mi/h using a drag chute, the problem involves converting speed to meters per second and applying kinematic equations. The calculated acceleration is approximately -19.66 m/s², leading to a force of about -17,259.2 N when using Newton's second law. However, a correction in calculations suggests the net force should be around 17,079 N, with confusion regarding the sign of the force. The discussion highlights the importance of careful unit conversion and accurate application of physics formulas. Overall, the correct force calculation is essential for effective braking in drag racing.
physics114
Messages
7
Reaction score
0
Correct?

1. Given Problem

A drag racer crosses the finish line doing 203mi/h and promptly deploys her drag chute (the small parachute used for braking).
(a)What force must the drag chute exert on the 878kg car to slow it to 45.2 mi/h in a distance of 199m?
(b)Describe strategy.


2. Formulas

F=ma
vf^2=vi^2+2aΔx
1mi=1609m
1hr=3600s


3. Attempted Solution

b) Strategy
First convert mi/hr units into m/s. Find acceleration by using vf^2=vi^2+2aΔx. Then use the acceleration found and finding Force using Newton's second law.

a) Calculations
Converted
203mi/hr = 90.279m/s
45.2mi/hr = 20.2019m/s

Plug into Motion Equation for Acceleration
(vf^2-vi^2)/(Δx) = 2a
[(90.279)^2 - (20.2019)^2] / [(199m)] = 2a
(408.117-8231.75) / (199m) = 2a
-39.3147 = 2a
a = -39.3127/2
a = -19.6574 m/s^2

Use Newton's Law
F=ma
F= (878kg)(-19.6574m/s^2)
F= -17259.2N
 
Physics news on Phys.org
90.279 squared is 8150.3 not 408.117, really not sure what you did there. It should be 8150.3 minus 408=7742, divide that by 199=38.9, divide that by 2= + 19.5 m/s squared

Net force should be 19.5 times the mass (878)= 17,079 N
 
Thank you =] Made the correction but apparently my answer has the wrong sign? Answer should be in x direction which I thought was what I was finding. Slightly confused =/
 
Um not sure, Physics confuses me...lol
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top