Geometrical Optics: Image of Object 2m Away From Convex Mirror

AI Thread Summary
The discussion revolves around determining the image characteristics of an object placed 2 m away from a convex mirror with a radius of curvature of 1 m. The focal length is calculated using the formula f = 1/2 * R, resulting in a focal length of 0.5 m. The mirror formula 1/do + 1/di = 1/f is applied to find the image distance. The image formed by the convex mirror is virtual and upright, located behind the mirror. The conversation emphasizes the importance of accurate ray tracing for visualizing the image formation process.
jst81161
Messages
10
Reaction score
0

Homework Statement


An object is located 2 m away from a convex mirror with radius of curvature of 1 m.
(a) Draw the ray trace diagram (observe scale!) and use that to deduce where the image
occurs
(b) What is the distance between the image and the mirror?
(c) Strike out that which is incorrect. The image is real/virtual, upright/inverted

Homework Equations


f=1/2*R
1/do + 1/di= 1/f



The Attempt at a Solution


 
Physics news on Phys.org
If that's the way you attempted the question you are not going to get anywhere for sure!:smile: :smile:
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Is the Solution for Rotation of Spherical Mirrors Incorrect?
Replies
16
Views
1K
Find the location of the diver's reflection in the convex mirror
Replies
19
Views
823
Find the location and length of the final image
Replies
2
Views
849
Mirror placed horizontally between two half convex lenses
Replies
11
Views
1K
Could the Image from the First Mirror Be Real for the Second Mirror?
Replies
7
Views
2K
Microscope Optics: questions and calculations
Replies
12
Views
1K
Concave mirror reflection, problems with drawing setup
Replies
5
Views
1K
Are Real Images Always Inverted and Virtual Always Erect in Ray Optics?
Replies
9
Views
7K
Is the image upright for a reflective spherical balloon using ray tracing?
Replies
1
Views
1K
I Image construction with concave and convex mirrors
Replies
4
Views
1K

Hot Threads

Recent Insights

Back
Top