Help with Physics 11 Kinematics.

AI Thread Summary
A 5.0kg concrete block accelerates down a 34° slope at 4.2m/s², and the goal is to find the coefficient of friction. The discussion highlights the importance of using the correct angle, as the problem specifies 34° instead of 30°. Participants emphasize the need for a free body diagram and accurate calculations of forces, including gravitational components. The friction force is linked to the normal force, and it's crucial to incorporate the block's acceleration into the equations. Accurate unit usage and correct angle application are essential for solving the problem effectively.
aznpiggy
Messages
2
Reaction score
0

Homework Statement



A 5.0kg concrete block accelerates down a 34° slope at 4.2m/s^2. Find the coefficient of friction between the block and the slope.


Homework Equations



Fg=5*9.8=45

x=45sin30

y=45cos30


The Attempt at a Solution



a=(mgsinθ-Ff)/m → Ff=mgsinθ-ma

Thanks
 
Physics news on Phys.org
Welcome to PF,
Have you drawn your free body diagram? How did you get your x and y components? The question states that the slope is at a 34° angle to the horizontal, not 30°.

Hint: Friction force = μN

Hint 2: Remember to add units to EVERYTHING.
 
Yes, I have drawn a FBD with x and y components that is perpendicular to the ramp.

I used the Fg to find the x by going Fgsin30°. Which would be the same as Fn.

Where would I go from this step?
 
aznpiggy said:
I used the Fg to find the x by going Fgsin30°. Which would be the same as Fn.

Why are you using 30° as your angle when it states in the question that it is 34°?

Your x component isn't the same as your y component, which would be the normal force (Fn). You must also consider the acceleration of the concrete block in your calculations.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top