Calculating the Flight and Landing of a Golf Ball Hit with an Inclined Force

  • Thread starter Thread starter the pro
  • Start date Start date
  • Tags Tags
    Hi
AI Thread Summary
The discussion revolves around calculating the flight and landing of a golf ball struck at an angle of pi/6 with a force of 16k Newtons. The ball, weighing 45.5 grams and measuring 4.25 cm in diameter, experiences air friction quantified as 0.25 Newton seconds/meter. Participants express confusion over the terminology used, particularly regarding the definition of "action" and the nature of the air friction measurement. Clarification is sought on the relevant equations and the specifics of the problem statement, which appears to have typos. Overall, the thread highlights the need for precise definitions and accurate parameters in physics problems.
the pro
Messages
45
Reaction score
0

Homework Statement



It is a windless day at standard temperature and pressure. A golf ball of mass 45.5 grams and 4.25 cm diameter rests on a golf tee. It is hit by a golf club in an elastic collision with inclination pi/6 and force 16k Newtons. During flight, the air friction is 0.25 Newton seconds/meter. The ball lands inelastically in ...a sand pit at the same elevation as the golf tee.
Q: What was the action of the golf ball ?

Homework Equations





The Attempt at a Solution

 
Physics news on Phys.org
What equations do you think might be relevant? Did you make an attempt at a solution?
 
No i don't have no clue about this but if you don t mind could you help me.
 
the pro said:

Homework Statement



It is a windless day at standard temperature and pressure. A golf ball of mass 45.5 grams and 4.25 cm diameter rests on a golf tee. It is hit by a golf club in an elastic collision with inclination pi/6 and force 16k Newtons. During flight, the air friction is 0.25 Newton seconds/meter. The ball lands inelastically in ...a sand pit at the same elevation as the golf tee.
Q: What was the action of the golf ball ?

Homework Equations





The Attempt at a Solution


The problem statement appears incomplete, or at least has some typos in it. What do you mean by "the air friction is 0.25 Newton seconds/meter"? That's not the force of friction -- what measure of friction is it? And you need to define what you mean by "action" of the ball. What are the possible "actions"?
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top