Horizontal force on a bicycle dependent on center of mass?

AI Thread Summary
The horizontal force that propels a bicycle forward is applied at the contact point of the rear wheel with the ground, specifically at the center of the back wheel. When pedaling, not all of the force contributes to horizontal acceleration; some force acts vertically against gravity due to the angle between the applied force and the center of mass. The effective horizontal force can be calculated as F*cos(a), where 'a' is the angle of application. Additionally, torque at the rear wheel can lead to a wheelie, but the forward force on the bike remains constant despite the force vector not aligning with the center of mass. Overall, the dynamics of force application and resulting motion adhere to Newton's laws, demonstrating that acceleration occurs even when force is not applied at the center of mass.
Imperial Sky
Messages
4
Reaction score
0
Hello!

If I pedal a bicycle, where is the force that moves the bike forward horizontally applied?
Is it the bottom of the back wheel or the center of the back wheel?

When the force applied to that point is F, does all that force goes into horizontal acceleration, or does some of that force go vertically agaisnt gravity, because there is an angle between the horizontal force and the center of mass? Would the actual horizontal force then be F*cos(a) ?

If anyone could help I would be thankful.
 
Physics news on Phys.org
Newton third law pairs: at the contact patch, the tire exerts a backwads force onto the ground, the ground exerts a forward force onto the bike. At the tire's axle, the tire's axle exerts a forward force onto the bike, the bike exerts a backwards force onto the tire's axle (the bike may be accelerating).

There's also a torque at the rear wheel. This may result in a wheelie, but the forwards force on the bike remains the same, even it the force vector does not go through the center of mass of the bike.

Another example of this is a horizontal force applied to the end of a veritcal rod in space, absent any other forces. The linear motion follows Netwon's law, force = mass x acceleration or acceleration = force / mass, even if the force is not applied at the center. Since the other part of the Newton third last pair is a reaction force, then in order to generate that force at the end of the rod, the point of contact experiences a greater amount of acceleration since it rotates while the center of mass accelerates horizontally.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top