How can I make a DC-DC converter for my car to power a CD drive?

  • Thread starter Thread starter saad ahmed khan
  • Start date Start date
  • Tags Tags
    Car Computer Drive
AI Thread Summary
To power a PC CD drive in a car, a DIY DC-DC converter is needed to convert 12V to +12V and +5V with two grounds. The user seeks circuit diagrams and parts lists due to the unavailability of affordable commercial options. Recommendations include using the car's 12V directly for the 12V supply and employing a 7805 linear regulator for the 5V output, as this approach is simpler and cleaner than building a full DC-DC converter. Clarification on the purpose of the CD drive is suggested to better assist with the project. Overall, the focus is on creating a cost-effective solution for powering the CD drive.
saad ahmed khan
Messages
46
Reaction score
0
hello every one
i just joined up
can anyone supply me with circuit diagrams and parts lists
i want to run a pc cddrive in my car
so i want to make a dc dc converter thaht takes 12V and gives out +12V +5V and two grounds like in a pc
there are converters and inverters available
but they are expensive not readily available in our country and i can't buy online
so iwant to make my own circuit

can anyone please help :smile:
 
Engineering news on Phys.org
hello all
i still couldnot get help
may be some one could send me circuit diagram for dc ac inverter 100w or more
and parts list
thanks any body
 
You probably didn't get help because it isn't clear what you are trying to do. For what purpose do you want a cd-rom drive? Is it connected to a computer? Anyway, my recommendation would be to buy an adapter from Radio Shack that puts out 5V, rather than try to make one yourself.
 
saad ahmed khan said:
hello all
i still couldnot get help
may be some one could send me circuit diagram for dc ac inverter 100w or more
and parts list
thanks any body
You don't need 100W for a CDROM drive -- probably more like a couple of watts. Just use the car 12V straight for the 12V (maybe filter it a little), and use a 7805-type linear regulator to make the 5V. Pretty straightforward, and a lot cleaner supplies compared to using a DC-DC converter.
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Back
Top