How can I use the range equation to find the initial velocity of a projectile?

  • Thread starter Thread starter Havenater23
  • Start date Start date
  • Tags Tags
    Angle Projectile
AI Thread Summary
To find the initial velocity of a projectile, the range equation can be applied alongside component analysis. The hang time of 4.6 seconds provides the vertical motion information, while the horizontal distance of 23 meters is used to calculate the horizontal velocity (Vx). The equation Dy(t) = -0.5at^2 + Vit + y0 helps determine the vertical component of the velocity (Vy). By solving for Vx using the horizontal distance and time, and then calculating the resultant velocity with the equation sqrt(Vx^2 + Vy^2), the initial velocity can be accurately found. This method effectively combines both horizontal and vertical motion to arrive at the solution.
Havenater23
Messages
38
Reaction score
0
1. A football is kicked so that is had a hang time for 4.6 s and hits the ground 23m down the field ?
What was the velocity of the football when it was kicked?
2. I used the Dx=Vx(t), don't know what to use after that.
3. Can someone show step by step how to get this, I'm having trouble trying to get an answer.
Can anyone just show me the equation I would use after that. I know I can find the xi and xf , but how do I find the yi or yf?
 
Last edited:
Physics news on Phys.org
Think about this problem in terms of components:

hang time is vertical, distance is horizontal. you should also used the equation Dy(t) = -.5at^2 + Vit + y0. from there, you can get the y component, then just find sqrt(Vx^2 + Vy^2)
 
Well this is how I set it up, similar to yours : dy= vi(t) + 0.5(a)(t)^2

I did that have got this: dy= vi(4.6) + 103.684
I didn't take into consideration that 9.8 is negative so sorry
But where do I go from there, I don't know how to solve the rest
 
You know the x distance: x0 = 0, xf = 23m, so 23 = Vx * t gives you Vx
you have the y time: solve for Vy with 0 = Dy(t). there will be 2 answers: 0 and the Vy you are looking for
 
Yeah, I know about competent breakdown. I got like 22.9 m/s for the Viy.I tested it using the range equation and it worked well. Thank you so much , it really did help me !
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top