How Do Diffraction Gratings Affect Light Wavelengths?

AI Thread Summary
Diffraction gratings affect light wavelengths by determining the angular positions of maxima based on the grating's pitch and the wavelength of light. For a grating with a pitch of 3.27mm, the first-order maxima for wavelengths of 495nm, 625nm, and 990nm occur at approximately 0.09, 0.11, and 0.18 degrees, respectively. The second-order maxima for these wavelengths are found at angles of 0.18, 0.22, and 0.36 degrees. The number of possible orders for each wavelength is limited to one for the given parameters. Additionally, for a transmission grating with a pitch of 1.75mm illuminated by red light at 625nm, the angles for the zeroth and first-order maxima can be calculated using the same diffraction principles.
wolfson_1123
Messages
14
Reaction score
0
Would appreciate anyhelp to solving any of these questions ty.

1 A diffraction grating of pitch 3 .27mm is illuminated at normal incidence with
light comprised of various wavelengths. If components of wavelength
495nm, 625nm and 990nm are present find:-
a) the angular positions of the first order maxima for these 3 wavelengths,
b) the angular positions of the second order maxima ( for all 3 ),and
c) the number of possible orders for each wavelength.

2 A diffraction grating has 600 lines per mm. If white light contains visible
wavelengths in the range 400nm to 700 nm, calculate the total angular
dispersion of the visible spectrum in 1st and 2nd order.

3 A transmission grating of pitch 1.75mm is illuminated by a collimated beam
of red light of wavelength 625nm. The beam is incident at at angle of 30o
with respect to the normal. At what angles would you expect to see the
zeroth order and the two first order maxima. Find by trial and error the
number of orders possible both sides of the zeroth order.

There were 8 questions and these are the ones i am stuck on tyty.
 
Physics news on Phys.org
Managed to do questions 1 and 2, just need some help on q 3.

Thank you in advance

Wolfson.
 


1. To find the angular position of the first order maxima, we can use the formula for diffraction grating: dsinθ = mλ, where d is the pitch of the grating, θ is the angle of diffraction, m is the order of the maxima, and λ is the wavelength of light.

a) For 495nm: θ = sin^-1(495x10^-9/3.27x10^-3) = 0.09 degrees
For 625nm: θ = sin^-1(625x10^-9/3.27x10^-3) = 0.11 degrees
For 990nm: θ = sin^-1(990x10^-9/3.27x10^-3) = 0.18 degrees

b) For 495nm: θ = sin^-1(495x10^-9/3.27x10^-3) = 0.18 degrees
For 625nm: θ = sin^-1(625x10^-9/3.27x10^-3) = 0.22 degrees
For 990nm: θ = sin^-1(990x10^-9/3.27x10^-3) = 0.36 degrees

c) The number of possible orders for each wavelength can be found by rearranging the formula: m = dsinθ/λ.
For 495nm: m = (3.27x10^-3)(sin0.09 degrees)/495x10^-9 = 1. For this wavelength, there is only one possible order.
For 625nm: m = (3.27x10^-3)(sin0.11 degrees)/625x10^-9 = 1. For this wavelength, there is only one possible order.
For 990nm: m = (3.27x10^-3)(sin0.18 degrees)/990x10^-9 = 1. For this wavelength, there is only one possible order.

2. The total angular dispersion can be found by subtracting the angles of the first and last order maxima.
For the first order: θ1 = sin^-1(λ/d) = sin^-1(400x10^-9/600x10^-3) = 0.38 degrees
θ2 = sin^-1(700
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top