How do i connect this V-I converter up

  • Thread starter Thread starter riie
  • Start date Start date
  • Tags Tags
    Converter
AI Thread Summary
To create an AC current source from a function generator, a transconductance op-amp can be used to convert voltage to current. A resistor can also serve this purpose, but it may alter the function of the transimpedance amplifier by making it an inverting amplifier. The user is seeking advice on how to connect the left-hand current output to the right-hand input of their circuit. There is confusion regarding the connection points for current flow between the two sides of the circuit. Further clarification on circuit connections and configurations is needed for effective implementation.
riie
Messages
17
Reaction score
0
Hi all,

I need to have an AC current source for testing but i do not have any equipment that can generate an AC current source. I have a function generator to produce an AC sine voltage and thinking to convert V to I using the transconductance op amp.

The first stage of my test circuit consists of an tranimpedance amplifier with other stages at the back and how can i connect V to I and I to V up? (Ciruit as attached)

Is there any other suggestion for the conversion of the AC voltage source to AC current souce from function generator?
 

Attachments

  • Cct.png
    Cct.png
    12.2 KB · Views: 614
Engineering news on Phys.org
riie said:
Hi all,

I need to have an AC current source for testing but i do not have any equipment that can generate an AC current source. I have a function generator to produce an AC sine voltage and thinking to convert V to I using the transconductance op amp.

The first stage of my test circuit consists of an tranimpedance amplifier with other stages at the back and how can i connect V to I and I to V up? (Ciruit as attached)

Is there any other suggestion for the conversion of the AC voltage source to AC current souce from function generator?

You could just use a resistor to convert your voltage source to a current. What is the load impedance of your circuit?

Or else just use the left-hand circuit in your attachment...
 
If I use a resistor to convert to current, wouldn't the transimpedance amplifier become an inverting amplifier as the resistor will be in series at the input?

Is there a way to connect up the left hand side current output the the input at the right hand side?
 
Any suggestions?
 
riie said:
If I use a resistor to convert to current, wouldn't the transimpedance amplifier become an inverting amplifier as the resistor will be in series at the input?

Is there a way to connect up the left hand side current output the the input at the right hand side?

Does this thread from early February help?

https://www.physicsforums.com/showthread.php?t=669659

.
 
The circuit from the thread you have given me, is the same mine with R2 removed.

I'm not sure how to carry this out using my circuit, or another other method.

For my circuit,
- The left side circuit need to the 2 points to be connected for current to flow
- But right side circuit has only one current input point to -ve input
 
Last edited:
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
Back
Top