How do i measure thermal conductivity?

AI Thread Summary
To measure thermal conductivity of liquids for a school project, several methods are available, with the modified transient plane source technique being one of the simplest. Access to basic lab equipment is essential for conducting these measurements effectively. Resources like C-Therm provide useful information on this technique. While online searches may yield various methods, practical guidance is crucial for accurate results. Utilizing established techniques will enhance the reliability of the project's findings.
TimeTraveler
Messages
1
Reaction score
0
I need a simple method of measuring thermal conductivity of liquids for a school project. I have access to the school's science labs, so I can get the basic equipments (hopefully). All I need is a method of measuring thermal conductivity.
 
Physics news on Phys.org
There are a lot of different methods for measuring thermal conductivity. One of the easiest to use in measuring a liquid is the modified transient plane source technique developed by Dr. Mathis' company (C-Therm)
http://www.ctherm.com/tci"
 
Last edited by a moderator:
Thread 'Variable mass system : water sprayed into a moving container'

Thread 'Variable mass system : water sprayed into a moving container'

Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Errors in Experiment with Low and High Conductivity Materials
Replies
2
Views
1K
How to calculate freezing time for a moist food by-product (75% water)
Replies
6
Views
694
How Do I Calculate Heat Transfer by Conduction Using Thermal Conductivity?
Replies
8
Views
1K
What is the significance of thermal resistance in heat transfer?
Replies
7
Views
2K
Thermal conductance of an angular section of a disc
Replies
4
Views
2K
I How to measure average thermal conductivity of a metallic material?
Replies
1
Views
2K
Measured Surface Resistivity Much Higher than Theoretical Value (Why?)
Replies
3
Views
1K
Modeling a kongming lantern (sky lantern)
Replies
6
Views
2K
Viscosity by Falling Sphere Equations
Replies
2
Views
2K
Physical meaning of thermal conductivity tensor
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top