How Does Doubling the F Number Affect Exposure Time?

AI Thread Summary
Doubling the f-number of a camera lens reduces the diameter of the aperture, resulting in less light entering the camera. To maintain the same total light energy on the film, the exposure time must be increased. Specifically, the required exposure time must be quadrupled when the f-number is doubled. This is because the amount of light is proportional to the area of the aperture, which decreases as the f-number increases. Understanding this relationship is crucial for achieving proper exposure in photography.
Lachlan1
Messages
21
Reaction score
0

Homework Statement


using the same film and level of illumination two pictures are taken, one with double the f number of the other. for both films to receive the same total light energy, what factor must the required time of exposure change for the picture with double the f number.


Homework Equations



f number = focal length/diameter

The Attempt at a Solution


double the f number couldbe taken as meaning half the diamter. therefore i can guess the answer should be a factor of two. but the f number formula doesn't relate 'total light energy' to anything does it? i thought it was a rating of light intensity.??
 
Physics news on Phys.org
Hi Lachlan1! :wink:
Lachlan1 said:
using the same film and level of illumination two pictures are taken, one with double the f number of the other. for both films to receive the same total light energy, what factor must the required time of exposure change for the picture with double the f number.

f number = focal length/diameter

If these are with the same camera (it doesn't say), then the focal length is presumably the same, so the diameter is different.

Bigger lens … more light! :smile:
 
Hi, thanks for that. But the question is asking what is the difference in the time of exposure. do you know what is being referred to as light energy?
-- well i just found out the answer is four, but I am not sure how to get that?
 
Last edited:
Amount of light is directly proportional to the area through which light comes into the camera.
 
(just got up :zzz: …)
Lachlan1 said:
… do you know what is being referred to as light energy?

light energy is just another name for the amount of light :smile:
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top