How Does Elevator Acceleration Affect Scale Readings?

  • Thread starter Thread starter chs60815
  • Start date Start date
  • Tags Tags
    Dynamics Friction
AI Thread Summary
The discussion focuses on how elevator acceleration impacts scale readings, using a scenario with a 600 N student in an 814 kg elevator. When the elevator accelerates, the scale reads 464 N, prompting calculations to determine the elevator's acceleration. The correct approach involves using the force equation F = ma, where the difference in weight readings indicates the force due to acceleration. The calculations reveal an acceleration of approximately 0.167 m/s². Participants emphasize the importance of understanding the forces involved without complicating the problem with unnecessary variables.
chs60815
Messages
1
Reaction score
0
1. A 600 N physics student stands on a bathroom scale in an 814 kg (including the student) elevator that is supported by a cable. As the elevator starts moving, the scale reads 464 N .
1) Find the magnitude of the acceleration of the elevator.

2.F=ma ?

3.I tried to separate into y and x equations and find the values but it didn't work.
 
Physics news on Phys.org
welcome to pf!

hi chs60815! welcome to pf! :wink:
chs60815 said:
… 2.F=ma ?

3.I tried to separate into y and x equations and find the values but it didn't work.

x ?? which way is this elevator going?? :confused:

F = ma should do it …

show us your full calculations, and then we'll see what went wrong! :smile:
 
there is no need for x.
For the question you need to be clear on one thing. The scale just shows the amount of force you give it while standing.
 
No x-axis interactions are happening.
Answer: 600N-X(force caused by elevator)=464N
x=136N=ma
136N/814kg=.167m/s^2
 
mattwoerd said:
No x-axis interactions are happening.
Answer: 600N-X(force caused by elevator)=464N
x=136N=ma
136N/814kg=.167m/s^2

Hey mattwoerd,
It seems you are new to PF. I should tell you something- you are not supposed to solve the whole question in the post. You should only give hints or clear doubts. Read PF rules.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top