How Does Horizontal Force Balance with Friction on an Inclined Plane?

AI Thread Summary
To analyze the equilibrium of a 2.00 kg block on a 55° incline, the horizontal force F must balance the gravitational and frictional forces acting on the block. The coefficient of static friction is given as µ s = 0.300, which is essential for calculating the frictional force. Starting with a free-body diagram helps in identifying the forces in both the x and y directions, leading to the equations of motion. The net forces in both directions must equal zero, allowing for the determination of the minimum value of F and the normal force exerted by the incline. Understanding these relationships is crucial for solving the problem effectively.
ngorecki
Messages
37
Reaction score
0
A 2.00 kg block is held in equilibrium on an incline of angle θ = 55° by a horizontal force, F. If the coefficient of static friction between block and incline is µ s = 0.300, determine
(a) the minimum value of F and
(b) the normal force of the incline on the block.

F = ma
Mu = Ff/Fn

I am having trouble starting out. I don't know what the initial equation should be. Could i get some hints?
 
Physics news on Phys.org
Always, always, always start with a free-body diagram. Have you done that yet?
 
I have done that.
And i changed gravity into the x and y components.
I am not sure what to solve for first/how to solve for it
 
The object is in equilibrium, so the net force in the x direction equals zero and the net force in the y direction equals 0. Now solve for that force F in the x and y direction to find its components.
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Static equilibrium | Uniform sphere on incline | Determining friction
Replies
43
Views
2K
Block on top of an inclined plane, with a rough surface, that moves with constant acceleration
Replies
41
Views
3K
Question Concerning The Coefficient of Friction: Block on a Rough Inclined Plane
Replies
5
Views
2K
Compute acceleration on an inclined plane with friction
Replies
5
Views
2K
Dynamics problem involving an inclined plane and Friction
Replies
1
Views
2K
Inclined Plane Static Friction Coefficient
Replies
11
Views
4K
Truck with attached inclined plane and a block on the incline
Replies
7
Views
2K
Determining the angle while dealing with friction on an inclined plane
Replies
8
Views
3K
Is the Block Moving Horizontally or Perpendicularly on the Inclined Plane?
Replies
3
Views
2K
Push/Pull Force of wheeled cart on an incline
Replies
7
Views
4K

Hot Threads

Recent Insights

Back
Top