How Does Throwing a Medicine Ball Affect Beam Displacement?

AI Thread Summary
The discussion revolves around calculating the new x-position of a person on a beam after a medicine ball is thrown. The initial setup includes a beam with two people at either end and a medicine ball held by one. The center of mass is crucial for determining the beam's displacement, with initial calculations yielding a center of mass value of 1.53. After some trial and error, a revised center of mass value of 1.434 was found to be more accurate for the calculations. The conversation highlights the challenges of using online systems for physics problems and the importance of verifying initial assumptions.
tgitatif
Messages
5
Reaction score
0
1. Homework Statement
A person with mass m1 = 61 kg stands at the left end of a uniform beam with mass m2 = 104 kg and a length L = 2.7 m. Another person with mass m3 = 68 kg stands on the far right end of the beam and holds a medicine ball with mass m4 = 8 kg (assume that the medicine ball is at the far right end of the beam as well). Let the origin of our coordinate system be the left end of the original position of the beam as shown in the drawing. Assume there is no friction between the beam and floor.

3)After the ball is thrown to the person on the left, what is the new x-position of the person at the left end of the beam? (How far did the beam move when the ball was throw from person to person?)


2. Homework Equations
Center of mass equation (can't figure out how to type it on here)

3. Attempt at a solution
I kept the original center of mass of 1.53 since it doesn't move and created an equation to solve for the new position.

1.53 = \frac{(61+8) (0-x) + 104 (1.35-x) + 68 (2.7-x)}{241}

And I get x = .186m, which is not correct.
 
Physics news on Phys.org
I would check your center of mass value to start -- I got 1.434.
 
The system accepted 1.53 as the answer. I could try 1.434 though.
 
Wow. I don't know why it accepted something so far off for the first question. Using 1.43 worked, thanks.
 
No problem -- those darn online things.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top