How Does Time Affect the Velocity of a Kicked Soccer Ball?

  • Thread starter Thread starter zileas
  • Start date Start date
  • Tags Tags
    Ball Projectile
AI Thread Summary
The discussion focuses on calculating the velocity of a kicked soccer ball at specific time intervals, using initial speed and angle. The initial horizontal and vertical velocities are determined as 10.88 m/s and 5.07 m/s, respectively. The participant struggles with applying the equations of motion, particularly in relation to vertical velocity and displacement. Clarifications are provided that the acceleration due to gravity is constant at 9.8 m/s², and time must be incorporated into the vertical velocity calculations. Ultimately, the correct approach involves using the provided equations to find the magnitude of the velocity at the specified times.
zileas
Messages
6
Reaction score
0

Homework Statement



A soccer ball is kicked with an inital speed of 12.0 m/s in a direction of 25.0 degrees above the horizontal. Find the magnitude and direction of its velocity A) 0.250 s and b) 0.500 s after being kicked. C) Is the ball at its greatest height before or after 0.500 s?

Homework Equations



a = (Vf - Vi)/t

d = ((Vi + Vff / 2)t

d = Vit + 0.5at[super]2[/super]

Vf = 2ad + Vi[super]2[/super]

The Attempt at a Solution



I'm really stuck on this.

I've gone with:

Vh = cos(25)12.0m/s
Vh = 10.88 m/s

Vi = sin(25)12.0m/s
Vi = 5.07 m/s

Now I've heard that in class if your initial vertical velocity in these types of problems has to be equal to the final or finishing vertical velocity...

So since I have Vi = 5.07 m/s ; I set Vf = -5.07 m/s

...and worked from there, but I am not sure at all if this was correct.

From there I tried to work out the displacement ...

Vf = 2ad + Vi[super]2[/super]

-5.07m/s = 2(-9.8m/s2)(d) + 5.07[super]2[/super]

d = 1.57 m

... and this is where I KNEW (at least I think I know...) that I'm horribly wrong. A kick with an initial vertical velocity of 5.07 m/s and overall 12.0 m/s ... and my displacement is 1.57 m total...

If anybody can help get me pointed in the right direction on this ... I would GREATLY appreciate it.
 
Physics news on Phys.org
v_x = v_0_x +a_x \cdot t = v_0_x =12 \cos(25^{o})

v_y= v_0_y + a_y \cdot t =12sin(25^{o})-9.81 \cdot t

v=\sqrt{v_x^2+v_y^2}
 
dirk_mec1 said:
v_x = v_0_x +a_x \cdot t = v_0_x =12 \cos(25^{o})

v_y= v_0_y + a_y \cdot t =12sin(25^{o})-9.81 \cdot t

v=\sqrt{v_x^2+v_y^2}

I don't understand how these help me... isn't there still 2 unknowns with a and t ? I'm so confused.
 
zileas said:
I don't understand how these help me... isn't there still 2 unknowns with a and t ? I'm so confused.


those equations tell you the final answer... that equation for the v he gave you was the final magnitude of the velocity. The a is not unknown because it is 9.8m/s^2 (acceleration of gravity in Y direction) the T is unknown because you have to plug in the values of t you want to solve for...

Vx= Vox*cos(25)
Vy= Voy*sin(25)-(9.8m/s^2)(t)

time doesn't have to be factored into the Vx because that speed is at a constant speed in the x direction until it hits the ground because there are no forces acting on it (assuming no air friction).

For Vy does need time factored into it because gravity is acting on it.

So plug in the time values for t that you need answers for and use the equation given by dirk to find the magnitude of the velocity... V= sqrt(Vx^2+Vy^2)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top