How Far Will a Rock Travel Horizontally from a Volcano When Ejected at an Angle?

AI Thread Summary
Rocks ejected from a volcano can reach speeds of up to 170 m/s and a maximum height of 3,220 meters above sea level when launched vertically. For a rock ejected at a 30-degree angle, the horizontal distance it travels can be calculated by separating the x and y components of its motion. The time of flight is determined using the vertical motion equation, factoring in initial velocity and gravitational acceleration. Users are struggling with calculations, particularly in determining the correct time of flight and horizontal distance, which leads to incorrect results. Accurate application of kinematic equations is essential for solving these projectile motion problems.
SilentBlade91
Messages
34
Reaction score
0
1. I got the first part right but I cannot figure out how to do the second part! Help please! And thank you!

Volcanoes on the Earth eject rocks at speeds of up to 170 m/s. Consider a 1750 m high volcano which ejects rocks in all directions. What is the maximum height above sea level reached by rocks?
Answer: 3.22*10^3m

part B: Consider a rock ejected an angle of 30degrees. How far from the axis of the volcano (horizontally) will it strike the ocean?
 
Physics news on Phys.org
separate your x and y components

x:
v0x=170cos30
x=?
t= from y

y:
v0y =170sin30
a =-9.81m/s^2
y = -1750m
t =
solve for t using y=v0*t+(1/2)at^2
then plug t into your x component to get x

(make sure to keep your initial y velocity positive and your acceleration and y distance negative)
 
Hi, Iam currently working on a similar problem and I keep getting it wrong. I found t to equal 17.34s or 3.57s by using the quadratic formula i then took a time and plugged it back into the formula using all the x component numbers and got 2429.14m or 4084.41m both are wrong.

my volcano is 2000m high and rocks are shooting at 45 degree angle traveling at 170m/s.
thanks
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top