How Is Time Calculated for Angle Reduction in Javelin Throw Projectile Motion?

AI Thread Summary
In the javelin throw scenario, the initial launch speed is 30 m/s at an angle of 33° above the horizontal. To determine the time required for the angle to decrease to 15°, the motion must be analyzed in two components: horizontal and vertical. The vertical component is influenced by gravity, while the horizontal component remains constant. The vertical velocity must be calculated to find the resultant angle of 15°, and from there, the time can be derived using the vertical motion equations. Understanding these components is crucial for solving the problem effectively.
sweetlavender
Messages
3
Reaction score
0
4.In the javelin throw at a track-and-field event, the javelin is launched at a speed of 30 m/s at an angle of 33° above the horizontal. As the javelin travels upward, its velocity points above the horizontal at an angle that decreases as time passes. How much time is required for the angle to be reduced from 33° at launch to 15°?
i don't understand how we can find the difference between the time without them giving the velocity at 15degrees?
 
Physics news on Phys.org
You will have to split the motion into 2 components. The horizontal and the vertical. The vertical is subject to the acceleration due to gravity and the horizontal should be assumed to be constant. You need to find the vertical component that gives a resultant that has an angle of 15 degrees with the horizontal. Then you can find the time it takes to go from the original vertical component of velocity to the one at 15 degrees.
 
yes i did get the components of x and y
Vox=(30m/s)cos33=25.16m/s
Voy=(30m/s)sin33=16.339m/s
and then i tried to find the total time it takes with t=-2(Voy/g). that's it i am stuck over there i don't now how to go further :(
 
did you find the vertical component to get 15 degrees?
You know, of course, that the horiz.velocity doesn't change
...so you know 1 side and 1 angle (as well as the 90)
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top