How Long to Fill Tank with 3 Pumps?

  • Thread starter Thread starter gloppypop
  • Start date Start date
  • Tags Tags
    Tank Water
AI Thread Summary
Three pumps fill a tank at different rates: Pump A fills it in 15 minutes, Pump B in 30 minutes, and Pump C in 60 minutes. When all three pumps operate simultaneously, their combined rate is calculated by adding their individual rates, resulting in an incorrect estimate of 8.57 minutes to fill the tank. The contributor expresses frustration over their misunderstanding of the problem, believing their approach is correct despite a classmate's disagreement. The discussion emphasizes the importance of correctly applying rates in such problems without overcomplicating the solution. Ultimately, the contributor seeks clarity on the correct method to determine the time required to fill the tank using all three pumps.
gloppypop
Messages
5
Reaction score
0

Homework Statement


Three pumps are attached to a three-dimensional tank. They pump water into the tank at a constant rate.

Pump A when turned on alone fills up the tank in 15min.

Pump B when turned on alone fills up the tank in 30min.

Pump C when turned on alone fills up the tank in 60min.

If ALL THREE pumps are turned on at the same time, how long will it take to fill up the tank?

Homework Equations

The Attempt at a Solution



The volume of the tank doesn't matter in this question. So I tried to find the rates at which each pump filled up the tank.

Pump A: Rate A = 1 tank/15min
Pump B: Rate B = 1 tank/30min
Pump C: Rate C = 1 tank/60min

I then added the rates, since they are each constant: Rate A + Rate B + Rate C = 7tank/60min = 1 tank/8.57min.

8.57 min to fill the tank with all three pumps turned on. This was incorrect.

I'm kicking myself because I've already taken classical mechanics and a sufficient amount of math courses, yet I can't seem to think out this simple problem.
 
Last edited:
Physics news on Phys.org
The answer seems right to me. If you think about the time taken to fill the tank will all the pumps filling simultaneously, is less than that taken by the pump A which has highest rate as it should be. This is just ratio proportion kind of problem. I think you are making it complicate by thinking about classical mechanics.
 
Yes, this has to be right... My classmate was telling me it was wrong and it had me really irked. Thought I was goin crazy for a minute.

Thanks =]
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top