How Much Water Evaporates to Remove Heat from Basal Metabolism?

  • Thread starter Thread starter that1grrl
  • Start date Start date
  • Tags Tags
    Metabolism
AI Thread Summary
To calculate the amount of water needed to evaporate for cooling from basal metabolism, the heat generated is 60 kcal/hr for a 65 kg person. The formula Q = mL, where L is the heat of vaporization (539 kcal/kg), is used to determine the mass of water required. Setting up the equation yields m = 60 kcal/hr divided by 539 kcal/kg, resulting in approximately 0.111 kg/min. This translates to about 6.679 kg/min, or nearly seven liters of water evaporating per minute to remove the heat generated by basal metabolism. The calculations highlight the significant amount of water required for effective thermoregulation through evaporation.
that1grrl
Messages
7
Reaction score
0
I can't seem to get this problem to work out...any suggestions?

-HOw much water would have to evaporate from the skin/min to take away all of the heat generated by basl metabolism (60kcal/hr) for a 65Kg person.
 
Physics news on Phys.org
The heat generated by this process needs to change the water from its liquid to its vapor state. The amount of heat, Q, required to alter a mass m of water to its vapor state is given by
Q=mL where L is the heat of vaporization of water which is 539\ kcal/kg.
 
So would I set the problem up like this:

60 Kcal/hr (60 min/hr)= m (539 Kcal/kg)

m=6.679Kg/min
 
That is about seven liters of water per minute!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top