How to Calculate Javelin Throw Dynamics in Projectile Motion?

AI Thread Summary
To calculate the dynamics of Jill's javelin throw, the initial vertical and horizontal velocity components must be determined using the launch angle of 35 degrees and the initial height of 2.2 m. The problem requires solving kinematic equations for both horizontal and vertical motions, with the initial position set at the release point. The impact velocity and angle can be found by decomposing the launch velocity into components and applying the equations of motion until the javelin reaches the ground. The discussion emphasizes the need to introduce an unknown for the launch velocity and to recognize that time is consistent across both motion equations. Understanding these principles will facilitate solving for the unknowns related to the javelin's trajectory.
kpadgett
Messages
8
Reaction score
0

Homework Statement


Jill throws a Javelin by first accelerating it from rest through 85 cm and releasing it from a height
of 2.2 m at an angle of 35 degrees and it goes a distance of 62 m.

A) What are the values of the vertical and horizontal components of initial velocity?

B) Find the following:
X-initial position, Y-initial position
X-final pos., Y-final pos.
X-velocity initial, X-velocity final
Y-velocity initial, X-velocity final
Acceleration in x and y direction
and t-final for X and Y

C) What is the magnitude of the impact velocity vector?

D) What is the impact angle?


Homework Equations



I'm sure I have missed one:
V=(ds/dt)
a= (Vf-Vi)/(tf-ti)
x(t)=xi + (Vx)(t)
y(t)=yi + (Vy)(t) - (1/2)gt^2)

The Attempt at a Solution



I started writing down all my known terms and have the following from the given info:
Xi = 0
Yi = 2.2m
ax = 0
ay = -g = 9.8m/s^2
Yf = 0
Xf + 62
Theta = 35 degrees

At this point I went to plug known values into the x(t) and y(t) equations to find unknowns. The needed unknowns I see now are velocity and time of impact.

I am completely stumped on the next step to take from here to find velocity or time of impact. Any help would be appreciated.
 
Physics news on Phys.org
So, does the "initial" position and velocity of the javelin correspond to when it was released by Jill, or to its position when it first begins to accelerate? The problem statement is not specific about this so it's badly posed by its author. Just thought I'd mention that.

Assuming that the author meant the initial position and velocity correspond to the instant of release then you need to write the kinematic equations for the horizontal and vertical motions that take place from that instant until the javelin lands. Set the initial x position to zero and the initial height to the given release height for that instant. The initial velocity should be decomposed into components via the appropriate trigonometry. The javelin "lands" when its vertical height reaches zero. Two equations in two unknowns: Solve for v and time to impact.
 
I have been sitting here trying to find which variable to choose, and which equation to try to work with the find t or v. There just seems to be an unknown variable too many in every one. I also wonder about the wording. I just need a hint to get started on this.
 
You need to introduce an unknown for the launch velocity, v. Since you know the launch angle, you can write the horizontal and vertical launch speeds in terms of that. So for the price of one unknown you get two initial variables.
You can do the same with time. The time taken is the same for both horizontal and vertical motions. So your two 'distance = initial distance + initial speed * time + etc.' equations share two unknowns - solve.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top