How to find tension in strings pulling on carts.

AI Thread Summary
To find the tension in strings connecting carts, start by determining the acceleration of the system using the net force and total mass. The first cart experiences a net force of 30 N minus the tension, leading to the equation 30 - T = 5 kg * 2 m/s². For the second cart, apply the same principle, considering the tension from the first string and the force acting on it. The third cart follows similarly, factoring in the tension from the second string. Drawing free body diagrams for each cart is crucial for visualizing forces and solving for tension accurately.
drunkenrobot
Messages
4
Reaction score
0

Homework Statement



3 carts are connected by strings. The first cart is 5kg, the second 2kg, and the third 8kg. A string is fixed at the front of the first cart is pulled with a force of 30 N. In the following problems be sure to illustrate your answers with the corresponding free body diagrams.

a. What is the acceleration of the train of carts?

b. What is the tension in the string connecting the first and second car?

c. What is the tension in the string connecting the second and third car?


Homework Equations



Fnet = ma

I don't remember the equations to find tension

The Attempt at a Solution



I figured out the acceleration easily:

Fnet = (m1 + m2 + m3)a
30 N = (15kg)a
a = 2 m/s ^2

The problem I'm having is I forget how to find the tension force in the strings.

Any help?
 
Physics news on Phys.org
Drawing a FBD for each cart is THE FIRST STEP and is VERY IMPORTANT.
 
ok, so for the first one I have 30 N pulling it in one direction (let's say to the left). So then the tension Force (Ft) is pulling in the opposite direction, right? But this is where I get confused. I don't know how to find the magnitude of the tension force.
 
Try to use Fnet = ma for the FIRST cart.
 
so I have a force of 10 N pulling to the left?
 
Considering the first cart:

Let us keep the FBD in mind.

The first cart has 30N to the left and the tension T to the right. Hence Fnet in the direction of the acceleration is (30 - T).

using Fnet = ma (in the direction of the acceleration)
30 - T = 5 x 2

etc.

The same may be done for the other two carts. Always keep the FBD in mind.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top