BIENT PRESSURE: Can Vacuum Pressure be Multiplied?

  • Thread starter Thread starter Idea04
  • Start date Start date
  • Tags Tags
    Multiplication
AI Thread Summary
Vacuum pressure cannot be multiplied in the same manner as hydraulic pressure. While hydraulic systems can amplify force through fluid mechanics, a vacuum represents the absence of pressure, with a maximum limit of zero. Therefore, the only net pressure achievable by creating a vacuum is the ambient pressure acting on the system. This fundamental difference means that the concept of multiplying vacuum pressure does not apply as it does with fluid pressure. Understanding these principles is essential for accurate applications in physics and engineering.
Idea04
Messages
194
Reaction score
1

Homework Statement



I know with hydraulic multiplication a small piston can create an increased force upward on a large piston. But if you take the small piston and pull upward on it creating a vacuum. Would the large piston have a multiplied vacuum force pulling it downward.

Homework Equations





The Attempt at a Solution

 
Physics news on Phys.org
Idea04 said:

Homework Statement



I know with hydraulic multiplication a small piston can create an increased force upward on a large piston. But if you take the small piston and pull upward on it creating a vacuum. Would the large piston have a multiplied vacuum force pulling it downward.
Perhaps you could explain the configuration you have in mind. If you pull on a hydraulic cylinder, you will push fluid out in front and draw hydraulic fluid in on the back side.

AM
 
I'm wondering if vacuum pressure can be multiplied in the same way fluid pressure can be multiplied.
 
Idea04 said:
I'm wondering if vacuum pressure can be multiplied in the same way fluid pressure can be multiplied.
No. Vacuum is the absence of pressure. There is a pressure limit for a vaccum: zero. So the greatest net pressure you can create by creating a vacuum is the ambient pressure.

AM
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top