I have a question if i have a oscillator pushing 7.8 Hz 144 Hz cycle

  • Thread starter Thread starter bary235
  • Start date Start date
  • Tags Tags
    Cycle Oscillator
AI Thread Summary
The discussion centers around a question about an oscillator generating a frequency of 7.8 Hz with a 144 Hz cycle, including references to polarity at 288 Hz and a bottom cycle of 432 Hz. Participants express confusion, noting that the concept of frequency does not involve polarity. Clarification is requested regarding the meaning of "7.8 Hz 144 Hz." The inquiry lacks coherence, leading to skepticism about the technical accuracy of the terms used. Overall, the conversation highlights the need for clearer definitions in discussing oscillators and their frequencies.
bary235
Messages
1
Reaction score
0
I have a question if i have a oscillator pushing 7.8 Hz 144 Hz cycle top (polarity 288 Hz) 432 Hz bottom cycle ... What kind oscillator is this?
 
Engineering news on Phys.org


bary235 said:
I have a question if i have a oscillator pushing 7.8 Hz 144 Hz cycle top (polarity 288 Hz) 432 Hz bottom cycle ... What kind oscillator is this?

Welcome to the PF.

Sorry, your question makes no sense.

Frequency does not have polarity.

And what is "7.8 Hz 144 Hz"?
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »

Thread 'Question about the voltage between two charged capacitors'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
View full post »
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Similar threads

RC Phase Shift Oscillator not Oscillating
Replies
41
Views
7K
555 timer, 50% duty cycle astable, run from 5V
Replies
38
Views
22K
Can I operate a 230V, 50 Hz, 500 W german oscillating saw
Replies
6
Views
1K
Induction motors and power factor
Replies
22
Views
3K
How can i generate an 8 hertz AC current from 60 hz AC
Replies
5
Views
2K
Frequency Question -- 24 VAC, 60 Hz versus 24 VAC, 20 Hz
Replies
12
Views
3K
When to have only voltage gain in an oscillator
Replies
40
Views
3K
Constructing a 1Hz 50 Hz 500 Hz 5Khz 30 Khz 50 khz Switching Device
Replies
5
Views
4K
I Successful predictions from anthropics? (History of science question)
Replies
11
Views
2K
What is the issue with my boost converter design and how can I fix it?
2
Replies
55
Views
5K

Hot Threads

Recent Insights

Back
Top