Calculating Volume Flow Rate for Apartment Building Faucet - 102 kPa Pressure

AI Thread Summary
To calculate the volume flow rate of water from a faucet supplied by a pump with a gauge pressure of 102 kPa, the relevant parameters include the height of 10m, the faucet's cross-sectional area of 2.0 cm², and the properties of water. The discussion highlights confusion regarding the variables used in the flow rate equation, particularly the absence of definitions for Pa and Pb, and the unclear role of the gauge pressure in the calculations. Participants seek clarification on whether the pump is volumetric and express the need for specific figures to proceed with the calculations. The conversation emphasizes the importance of correctly applying fluid dynamics principles to determine the flow rate accurately. Understanding these variables is crucial for solving the problem effectively.
alexito01
Messages
5
Reaction score
0
I need help with flow rate please!

Homework Statement



A pump at ground level creates a gauge pressure of 102 kPa in the water line supplying an apartment building. The water leaves the tank into a pipe at a negligible speed. It travels 10m up through the building and exits through a faucet. The cross sectional area of the faucet is 2.0cm2. (use for water density ρ=1000kg/m3 and acceleration of g=10m/s2). What is the volume flow rate of water leaving the faucet in cm3/s ?


Homework Equations





The Attempt at a Solution


Q=A+((2)[(Pa-Pb)-(pgh)]/p)^1/2
 
Physics news on Phys.org
alexito01 said:
Q=A+((2)[(Pa-Pb)-(pgh)]/p)^1/2

Hi alexito01! :smile:

Can you put the figures in, please?

It's difficult for us to work out what the letters refer to. :confused:
 


I have a question: is this a volumetric pump?

Why is there a plus sign after A?
Where has the 102 kPa gone to?
What's Pa and Pb? They aren't mentioned in the statement.
 
Last edited:

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »
Thread 'Trying to understand the logic behind adding vectors with an angle between them'

Thread 'Trying to understand the logic behind adding vectors with an angle between them'

My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
View full post »
Thread 'Correct statement about a reservoir with an outlet pipe'

Thread 'Correct statement about a reservoir with an outlet pipe'

The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
View full post »

Similar threads

What is the relationship between pressure and flow rate?
Replies
8
Views
4K
Volume Flow Rate: Solve for Water Leaving Faucet in cm^3/s
Replies
1
Views
7K
Calculating Volume Flow Rate of Olive Oil at a Processing Plant
Replies
1
Views
2K
The Pressure Distribution in a Narrowing Tube with Increasing Fluid Velocity
Replies
10
Views
4K
Q: Solve Poiseuille's Law for Volume Flow Rate
Replies
2
Views
1K
What Is the Mass Flow Rate at Exit in a Steady Flow System?
Replies
1
Views
1K
Using the steady flow energy equation, find the power required
Replies
11
Views
4K
Bernoulli's equation to find the flow rate
Replies
3
Views
2K
How Does Bernoulli's Principle Apply to Varying Pipe Diameters and Water Flow?
Replies
3
Views
2K
Pressure and Flow Rate in a Tank
Replies
10
Views
3K

Hot Threads

Recent Insights

Back
Top