Ideal Projectile Motion , horizontal and vertical components?

AI Thread Summary
The discussion revolves around calculating the height at which a ball hits a wall and its velocity components upon impact. The initial calculations for height were incorrect due to a misapplication of the time squared in the formula. The correct time to reach the wall was determined as 0.90 seconds, leading to a height of 14.5 meters above the release point. The horizontal component of the velocity was accurately calculated as 24.513 m/s. The vertical component calculations were revised, but confusion remained regarding the correct application of the kinematic equations.
djester555
Messages
10
Reaction score
0

Homework Statement



You throw a ball toward a wall with a speed of 32 m/s at an angle of 40.0° above the horizontal directly toward a wall. The wall is 22.0 m from the release point of the ball.


(a) How far above the release point does the ball hit the wall?


(b) What are the horizontal and vertical components of its velocity as it hits the wall?


The Attempt at a Solution



a).
(Ux)* t = Sx
(32cos40)* t = 22
t = 22/(32cos40)

Sy = (Uy)t+0.5(Ay)t^2
= {(32sin40)*[22/(32cos40)]
+0.5*(-9.8)*[22/(32cos40)]}m
= 12.16m i know this is wrong


b)b).
Vx= 32cos40
= 24.513m/s this is correct


(Vy)^2 = (Uy)^2+2(Ay)*(Sy)
= (32sin40)^2+2*(-9.8)*(-12.16)
Vy = 25.72m/s this is wrong

having problems with vertical component and part A to the question
 
Physics news on Phys.org
You correctly found the time it hits the wall: t = d/vx = 22/32 cos40

You used the correct formula for height: h = h0 + vyt - .5gt^2 but you forgot to square t!

AM
 
a).
(Ux)* t = Sx
(32cos40)* t = 22
t = 22/(32cos40)

Sy = (Uy)t+0.5(Ay)t^2
= {(32sin40)*[22/(32cos40)]
+0.5*(-9.8)*[22/(32cos40)]^2}m
-4.9*1.0626
= -5.20679
this still seems to be wrong
 
djester555 said:
a).
(Ux)* t = Sx
(32cos40)* t = 22
t = 22/(32cos40)

Sy = (Uy)t+0.5(Ay)t^2
= {(32sin40)*[22/(32cos40)]
+0.5*(-9.8)*[22/(32cos40)]^2}m
-4.9*1.0626
= -5.20679
this still seems to be wrong
I get 14.5 m:

t = 22/32cos40 = 22/24.5 = .90 sec.

h = vyt - .5gt^2 where vy = 32sin40= 20.5 m/s
= 20.5(.90) - .5 x 9.8(.9^2)
= 18.5 - 4.0
= 14.5 m

AM
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top